Like every other website on the planet, SmallNetBuilder uses cookies. Our cookies track login status, but we only allow admins to log in anyway, so those don't apply to you. Any other cookies you pick up during your visit come from advertisers, which we don't control.
If you continue to use the site, you agree to tolerate our use of cookies. Thank you!

Router Charts

Click for Router Charts

Router Ranker

Click for Router Ranker

NAS Charts

Click for NAS Charts

NAS Ranker

Click for NAS Ranker

More Tools

Click for More Tools

Wireless Features

Next I wanted to test the device using wireless. Using the remote, I navigated to the options page where I found the setup. When I told it to use wireless instead of wired, it immediately started searching for access points. At the time, I was working on my back porch where my neighbor's wireless signal was stronger than mine. So before I knew it, the device dutifully connected to her unencrypted access point and started scanning her network looking for a server. Oops.

Maybe in some jurisdictions, I would have been arrested for this transgression, or I suppose if my neighbor also had a Squeezebox I might have learned her taste in music, but it was not to be. I quickly backed out and told it to connect to my encrypted access point. The Squeezebox supports both WEP and the more-secure WPA encryption. I use both on my network, so I tried a 128-bit WEP connection. This was all fairly easy to set up, but using a remote to enter 27 hexadecimal characters to form the key is not the most fun thing to do in the world (Figure 5).

Figure 5: WEP Key Entry

Figure 5: WEP Key Entry

Once the device was set up wirelessly, it worked well. Since I was outside at the time, I used the Squeezebox's headphone jack and plugged in my headphones instead of hooking the device up to a stereo. Using it in this mode was a nice change. The display was fully visible outside on my shaded porch, and I had access to a large music collection to play while I worked. To assist in getting a good wireless signal, one of the setup screens contained a signal strength screen (Figure 6).

Figure 6: Signal Strength Screen

Figure 6: Signal Strength Screen

This was a nice feature and was handy to use while I was testing. I found that I could use the Squeezebox anywhere in my house, which means its range is pretty good since my access point is all the way down in my basement.

Wi-Fi System Tools
Check out our Wi-Fi System Charts, Ranker and Finder!

Support Us!

If you like what we do and want to thank us, just buy something on Amazon. We'll get a small commission on anything you buy. Thanks!

Over In The Forums

Hello. Setting up a new RT-AX86U this weekend. With my old Netgear router I could block access to a range of IP address on a daily schedule. I used th...
Hello,It seems that something unknown to me has changed and now when I have my node connected, it cause flaky internet connections. Without the node p...
I've never seen this error, and though it gave me a chuckle, need to know what is going on.No options/addons just a plain vanilla install with some po...
Update 2020/10/22 (9.0.0.4.386.40577)386 rc2-7 - Google Drive drive.google.com This version includes 18 models:ZenWiFi: XT8(RT-AX95Q), XD4(R...
Hi all,I have read a number of posts about roaming assistant with similar problems without a resolution. Apparently this feature was not working corre...

Don't Miss These

  • 1
  • 2
  • 3