Like every other website on the planet, SmallNetBuilder uses cookies. Our cookies track login status, but we only allow admins to log in anyway, so those don't apply to you. Any other cookies you pick up during your visit come from advertisers, which we don't control.
If you continue to use the site, you agree to tolerate our use of cookies. Thank you!

Router Charts

Click for Router Charts

Router Ranker

Click for Router Ranker

NAS Charts

Click for NAS Charts

NAS Ranker

Click for NAS Ranker

More Tools

Click for More Tools
   

Ranker Performance Summary
Open Mesh A40
Universal 802.11ac Access Point

Print 

Test Notes:
Revision 10 process with 6.3.14 firmware

# 9 for Total Wireless (95.8)
# 4 for 2.4 GHz Avg. Throughput (3.5)
#3 for 2.4 GHz Avg. Downlink Throughput [36.9 Mbps]
#4 for 2.4 GHz Avg. Uplink Throughput [34.5636 Mbps]
# 5 for 2.4 GHz Peak Throughput (5.0)
#5 for 2.4 GHz Peak Downlink Throughput [201.041 Mbps]
#5 for 2.4 GHz Peak Uplink Throughput [193.584 Mbps]
# 4 for 2.4 GHz Range (4.0)
#4 for 2.4 GHz Downlink Range [13.4 Mbps]
#4 for 2.4 GHz Uplink Range [11.8 Mbps]
# 7 for 5 GHz Avg. Throughput (6.5)
#5 for 5 GHz Avg. Downlink Throughput [61.575 Mbps]
#8 for 5 GHz Avg. Uplink Throughput [46.7313 Mbps]
# 7 for 5 GHz Peak Throughput (5.0)
#6 for 5 GHz Peak Downlink Throughput [456.392 Mbps]
#4 for 5 GHz Peak Uplink Throughput [436.075 Mbps]
# 8 for 5 GHz Range (6.0)
#5 for 5 GHz Downlink Range [19.7 Mbps]
#7 for 5 GHz Uplink Range [11.3 Mbps]
Wi-Fi System Tools
Check out our Wi-Fi System Charts, Ranker and Finder!

Support Us!

If you like what we do and want to thank us, just buy something on Amazon. We'll get a small commission on anything you buy. Thanks!

Over In The Forums

Hello. So I am new to qos settings. I have 3 Ring cameras that I want to make sure it gets highest priority for bandwidth. How do I set that up in the...
I picked up a RT-N53 to put it into a client bridge. I am only able to put it into repeater mode (as well as AP or main router).Does anyone know how t...
I have an ASUS RT-AC3200 router and when I am trying to use my xbox I am always on a strict NAT type and it is because it says I have a double NAT. I ...
i purchased a new asus rt-ac86u. connected to existing adsl modem (Linksys WAG320N) and i cam getting constant WAN connection fails, about every 5 to ...
Quick question - I have enabled FTP with TLS and it works just fine, however, how can I use my own certificate instead of the one generated by the rou...

Don't Miss These

  • 1
  • 2
  • 3