Like every other website on the planet, SmallNetBuilder uses cookies. Our cookies track login status, but we only allow admins to log in anyway, so those don't apply to you. Any other cookies you pick up during your visit come from advertisers, which we don't control.
If you continue to use the site, you agree to tolerate our use of cookies. Thank you!

Router Charts

Click for Router Charts

Router Ranker

Click for Router Ranker

NAS Charts

Click for NAS Charts

NAS Ranker

Click for NAS Ranker

More Tools

Click for More Tools

Wireless Features

Introduction

This time it's not the FCC website that provides a view of an upcoming Linksys product, but Linksys' own website instead. The WAP54GPE Wireless-G Exterior Access Point appears in the Wireless Basic Networking section next to the WCG200 Wireless-G Cable Modem Gateway.

The WAP54GPE

Figure 1: The WAP54GPE

It's an 802.11b/g access point housed in a weatherproofed, heated enclosure and powered via 802.3af Power over Ethernet. According to the User Manual available on the FCC website, it supports up to 8 wireless Virtual LANs (VLANs) as well as WDS-based wireless bridging (more on this shortly).

Figures 2 and 3 show the indicators on the front panel and connector ports on the top and bottom of the enclosure. If you choose to not use the built-in patch-style antenna, you can attach a single external antenna via single male N-type connector on the top.

WAP54GPE front panel

Figure 2: WAP54GPE front panel
(click image to enlarge)

The single 10/100 Ethernet connector on the bottom panel provides connection to the user's wired LAN and also brings in power from an 802.3af compliant PoE source.

WAP54GPE ports
Figure 3: WAP54GPE ports
(click image to enlarge)

More Wireless

Wi-Fi System Tools
Check out our Wi-Fi System Charts, Ranker and Finder!

Support Us!

If you like what we do and want to thank us, just buy something on Amazon. We'll get a small commission on anything you buy. Thanks!

Over In The Forums

Hi - Is it possible to re-direct LAN clients/ports to an external authenticated socks5 proxy? I can't find any posts about this.
Hi,I have been testing latest firmwares and found that after a time 2.4ghz devices are being dropped, keeping 5ghz devices connected. This happens wit...
My aimesh node is hardwired. The primary router shows it as connection priority ethernet and connection type wired. But in my system log/wireless log,...
Hey guys, first post here. This will inevitably turn into a build thread, but I need information to start.I have an RV that is about 300ft from the ro...
I purchased an ASUS Blue Cave router over a year ago when they dropped below $100 on sale, as I already had a couple of T-Mobile Asus routers converte...

Don't Miss These

  • 1
  • 2
  • 3