Like every other website on the planet, SmallNetBuilder uses cookies. Our cookies track login status, but we only allow admins to log in anyway, so those don't apply to you. Any other cookies you pick up during your visit come from advertisers, which we don't control.
If you continue to use the site, you agree to tolerate our use of cookies. Thank you!

Router Charts

Click for Router Charts

Router Ranker

Click for Router Ranker

NAS Charts

Click for NAS Charts

NAS Ranker

Click for NAS Ranker

More Tools

Click for More Tools

Wireless Features

Point-to-Point

The simplest bridging mode is where two bridge units connect to each other. You usually enter the MAC address of the unit on the opposite end of the wireless bridge in each bridge's configuration screen. Manufacturers are pretty consistent in describing this mode and the way it's set up. Figure 1 illustrates a Point-to-Point bridge.

Note Note that although only one client is shown on the far side of the bridge, you can have multiple clients, usually somewhere between 20 and 32.

Figure 1: Point-to-Point bridge

Figure 1: Point-to-Point bridge

Tip! Tip: Each AP/Bridge device has its own IP address. Although most products can be set to have the AP/Bridge obtain its IP address via DHCP, we recommend you set the IP information statically. This makes things much easier to troubleshoot when you're having network connectivity problems!

More Wireless

Wi-Fi System Tools
Check out our Wi-Fi System Charts, Ranker and Finder!

Support Us!

If you like what we do and want to thank us, just buy something on Amazon. We'll get a small commission on anything you buy. Thanks!

Over In The Forums

If someone is using this on their local machine on the network, is there anyway of forcing them to use my dns servers or blocking it?
I know there are lots of experts on this forum, so I was wondering if anyone could help me with a problem related to my internet connection. The probl...
Yesterday I installed the Kamoj v5 add-on with my Voxel firmware v1.0.2.75.2. I had some trouble with the addin and wanted to remove it by reinstallin...
I’m hoping for some insight so I can clarify in my own head. Please bear with me. Both are methods of securing my LAN, both mitigate a dynamic WAN IP ...
Would this work?nvram set FORCE_AUTO_UPGRADE=nnvram commitrebootCC

Don't Miss These

  • 1
  • 2
  • 3