Like every other website on the planet, SmallNetBuilder uses cookies. Our cookies track login status, but we only allow admins to log in anyway, so those don't apply to you. Any other cookies you pick up during your visit come from advertisers, which we don't control.
If you continue to use the site, you agree to tolerate our use of cookies. Thank you!

Router Charts

Click for Router Charts

Router Ranker

Click for Router Ranker

NAS Charts

Click for NAS Charts

NAS Ranker

Click for NAS Ranker

More Tools

Click for More Tools

Wireless Features

ASUSTOR logo Wondering when we're going to see 160 MHz wide AC channels? One industry analyst says it's gonna be awhile, and not because of limited spectrum.

A LinkedIn post by Maury Wood, Principal Analyst at EJL Wireless Research, says the problem is semiconductor design challenges.

Wood says the analog-to-digital and digital-to-analog converters required to handle the broader bandwidth are tough to implement in the 40 nm CMOS in common use today. And even if the converters could be designed, RF amplifiers with high enough signal to noise plus distortion (SINAD) specifications are the next challenge.

Read the whole post for the gory details.

More Wireless

Wi-Fi System Tools
Check out our Wi-Fi System Charts, Ranker and Finder!

Support Us!

If you like what we do and want to thank us, just buy something on Amazon. We'll get a small commission on anything you buy. Thanks!

...

Over In The Forums

My experience with the AX92u and a solution to get it working as it was intended to be used. A tri band mesh network with a wireless backhaul.I'm awar...
Hi,I last reported this issue about 3 weeks ago over GUI Feedback when one of my AiMesh Node (Bedroom) gone OFFLINE. I rebooted everything and all see...
I've been trying to solve the issue for half the day today.Router AC68U, firmware Merlin 384.18.Ive set the 2.4ghz band to 40Mhz. Tried different chan...
I'm trying to access the web interface of my Draytek Vigor 130 (in bridge mode) but my Asus RT-AC86U is not letting me.I asked on the Draytek forums a...
Continuation of. . .https://www.snbforums.com/threads/c...0-2-80sf-v-1-0-2-80-4sf-v-1-0-2-80-5sf.66275/https://www.snbforums.com/threads/custom-firmwa...

Don't Miss These

  • 1
  • 2
  • 3