Like every other website on the planet, SmallNetBuilder uses cookies. Our cookies track login status, but we only allow admins to log in anyway, so those don't apply to you. Any other cookies you pick up during your visit come from advertisers, which we don't control.
If you continue to use the site, you agree to tolerate our use of cookies. Thank you!

Router Charts

Click for Router Charts

Router Ranker

Click for Router Ranker

NAS Charts

Click for NAS Charts

NAS Ranker

Click for NAS Ranker

More Tools

Click for More Tools

Wireless How To

Performance - more

For the second test, I moved the ESR9850 to Location 1. This spot isn't that far away from Location 2, but it removes a wall from between the WNDR3700 and ESR9850 and puts it instead between the ESR9850 and test client.

Figure 8 shows that just that one change has a significant effect on signal strength, with the signal from the WNDR3700 now 6 dB (4X) stronger than the one from the ESR9850.

Main AP and repeater signal strength - repeater in Location 1
Click to enlarge image

Figure 8: Main AP and repeater signal strength - repeater in Location 1

Figure 9 shows that even though the client is working with a weaker signal from the repeater, its performance is significantly improved, with both write and read speeds of almost 22 Mbps.

Wireless throughput - client through ESR9850 in Location 1

Figure 9: Wireless throughput - client through ESR9850 in Location 1

This improvement is due to the stronger signal between the WNDR3700 and ESR9850, which leads to higher bandwidth between them. And with higher bandwidth coming in, the ESR9850 can provide higher bandwidth out.

Closing Thoughts

Wireless bridging and repeating remains a confusing aspect of wireless networking. Although devices are easier to configure and interoperability has improved among WDS devices, the topic is still full of unclear terminology, with the same terms used to describe things that are very different under the hood. And, if that isn't enough, remember that there is no Wi-Fi interoperability certification for bridging / repeating devices.

In spite of these drawbacks, WDS, bridging and repeating are useful tools to have in your networking bag of tricks. I hope this short series has helped you to better understand and use them.

More Wireless

Wi-Fi System Tools
Check out our Wi-Fi System Charts, Ranker and Finder!

Support Us!

If you like what we do and want to thank us, just buy something on Amazon. We'll get a small commission on anything you buy. Thanks!

Over In The Forums

Im getting agitated with the constant deletion of disgruntled members complaints and one of my own recently as well with no response yet again to the ...
I found a foible in the "Wireless MAC Filter" capability. I would call it a bug but perhaps it was done on purpose. I have only tested this in the "re...
Disclaimer: I am not a network guruGetting a 20 dBm difference.How does an Asus router know what the signal strength is at each device?Which do you th...
Hi all,Im having an issue with pixteltls, I live in the netherlands an Im using the Rabobank as bankingwith my phone I can not use the app from my ban...
(First post. If I'm in the wrong place please let me know. I have searched extensively first.)After a firmware update on my RT-AC68U I can't access it...

Don't Miss These

  • 1
  • 2
  • 3