Like every other website on the planet, SmallNetBuilder uses cookies. Our cookies track login status, but we only allow admins to log in anyway, so those don't apply to you. Any other cookies you pick up during your visit come from advertisers, which we don't control.
If you continue to use the site, you agree to tolerate our use of cookies. Thank you!

Router Charts

Click for Router Charts

Router Ranker

Click for Router Ranker

NAS Charts

Click for NAS Charts

NAS Ranker

Click for NAS Ranker

More Tools

Click for More Tools

Wireless How To

This article is sponsored by Edimax.


These days, 5 GHz is the place to be. It's the only band where you can take advantage of 802.11ac's higher throughput and, at least for now, it's relatively free of the congestion that chokes the 2.4 GHz band. But you say you like everything else about your faithful old router, despite that it's 2.4 GHz only? If only there were a way to just add 5 GHz 802.11ac.

Edimax' EW-7288APC Add-On Station is designed to do just that. With zero configuration out of the box, the EW-7288APC can add 5 GHz 802.11a/n/ac to any existing wireless network.

Edimax EX-7288APC Zero Router Setup

All you need to do to add the EW-7288APC to your existing network is:

  1. Unbox it
  2. Connect an Ethernet cable between the EW-7288APC and a router LAN port
  3. Connect power
  4. On your device, find the Edimax**-5GHz SSID listed on the bottom of the device
  5. Enter the wireless password from the bottom of the EW-7288APC
  6. Setup is complete

The EW-7288APC defaults to using a different SSID than your existing network. If you want the SSID to be the same as your main network, that's easy enough to change in the EW-7288APC GUI as shown below.

EW-7288APC GUI Wireless SSID page

EW-7288APC GUI Wireless SSID page

If you already have a dual-band AC router and instead need to connect an Ethernet-only device to it, the EW-7288APC can help, too. With a flip of a switch, it can also be used as a wireless bridge, while simultaneously extending your present 5 GHz network.

EW-7288APC AP to Bridge switch

EW-7288APC AP to Bridge switch

Bridge / extender setup is also very simple:

  1. Unbox it
  2. Flip the switch on the EW-7288APC to WiFi Bridge (image shown above)
  3. On your device, find the Edimax**-5GHz SSID listed on the bottom of the EW-7288APC
  4. Enter the wireless password from the bottom of the EW-7288APC
  5. Open a browser and to go http://edimax**.setup listed on the bottom of the EW-7288APC
  6. Click Next on the screen regarding extender location
  7. Choose the wireless network you want to extend
  8. Enter your current network passphrase and decide what you want to name the SSID
  9. Setup is complete

If you're using the EW-7288APC as a wireless bridge, just connect an Ethernet device to it.

EW-7288APC Extender / Bridge Setup

EW-7288APC Extender / Bridge Setup

In all, the EW-7288APC is a quick and easy way to add AC wireless to your network with zero configuration and without retiring your current router.

More Wireless

Wi-Fi System Tools
Check out our Wi-Fi System Charts, Ranker and Finder!

Support Us!

If you like what we do and want to thank us, just buy something on Amazon. We'll get a small commission on anything you buy. Thanks!

Over In The Forums

Is AiProtection DNS based/is it bypassed by using DNS over https?
Currently have the Netgear R7800 and it’s working great on stock firmware. Probably the best AC router I’ve owned to date.My wife and I recently purch...
Hi, I'm sorry for asking this if this topic may already exists but I am unable to find it.Is there any settings of my RT-AC1900P that I could change f...
I am interested in upgrading to the new AX standard and I was fixated on RT-AX88U since I previously owned RT-AC88U and really liked it.However then I...
Hi All,i purchased an AC68U 2 months ago, installed and forgot it.Yesterday my ISP notified me that my bandwidt usage was 80% of my monthly budget. SO...

Don't Miss These

  • 1
  • 2
  • 3