Like every other website on the planet, SmallNetBuilder uses cookies. Our cookies track login status, but we only allow admins to log in anyway, so those don't apply to you. Any other cookies you pick up during your visit come from advertisers, which we don't control.
If you continue to use the site, you agree to tolerate our use of cookies. Thank you!

Router Charts

Click for Router Charts

Router Ranker

Click for Router Ranker

NAS Charts

Click for NAS Charts

NAS Ranker

Click for NAS Ranker

More Tools

Click for More Tools

Wireless How To

Introduction

Updated 7/7/17 - Reflect proper octoScope Pal product names

The Wi-Fi landscape has shifted significantly since SNB's Wi-Fi test process was last changed only a year ago. Distributed Wi-Fi (DW) / mesh systems have come on strong, challenging the single point routers that have formed the bedrock of the consumer Wi-Fi market to date. And MU-MIMO has moved down-market into less expensive products that lack connectorized antennas, making our direct-connect test method less practical.

The past year has also shown that having multiple test setups increased test time and was more prone to errors. The return to walking a laptop around to test DW products also increased test time. So some streamlining was in order.

The Revision 10 Testbed

We once again worked with our test partner octoScope to design the testbed for the Revision 10 process. The new testbed got moved up all the way to Revision 10 to line up with the name of the process it is used with.

The new testbed can handle both single point routers and DW products of up to three modules. The top box is unchanged; it's still octoScope's Box-38 anechoic RF test chamber equipped with turntable and four octoScope high-gain antennas. Below that, however, everything is new.

SmallNetBuilder Wireless Testbed Revision 10

SmallNetBuilder Wireless Testbed Revision 10

The Multipath Emulator (MPE) has been replaced with octoScope's MPE2. The block diagram below shows that the multipath emulator can be bypassed to better model behavior in line-of-sight conditions. This also has the benefit of reducing path loss, which helps 5 GHz tests to reach higher maximum link rates. The built-in quadAttenuator has the same 63 dB attenuation range of the quadAttenuator modules. The ability to stack the MPE2's quadAttenuator with an outboard quadAttenuator provides additional attenuation needed to counteract the additional gain from the high-gain antennas that is not needed for 2.4 GHz testing.

octoScope MPE2 block diagram

octoScope MPE2 block diagram

Below the MPE2 are three new octoScope Box-18 RF chambers and a new TS (Test System) -MESH module detailed in the diagram below. The variable attenuation symbols represent octoScope quadAttenuators. The blocks marked 1:2 and 1:4 are octoScope RF splitter / combiners.

octoScope TS-MESH block diagram

octoScope TS-MESH block diagram
Updated 7/7/17

The Pals are octoScope's partner devices that can function in AP, STA or Monitor mode and support up to 32 virtual STAs. Each is based on a Qualcomm Atheros chipset, has an onboard processor and runs both an iperf3 server and IxChariot endpoint.

The Pal-245 is a selectable dual-band 3x3 device that supports up to three transmit / receive chains, 20, 40 and 80 MHz bandwidth and 256 QAM on both bands. It does not support MU-MIMO or 80+80 or 160 MHz bandwidth.

The Pal-24 and Pal-5 are 2.4 and 5 GHz 4x4 devices, respectively, that support up to four transmit / receive chains, 20, 40, 80, 80+80 and 160 MHz channel bandwidth and 256 QAM. Pal-5 also supports 1x1 and 2x2 MU-MIMO.

A key feature of all Pals is they can report / log all the status information you see in the screenshot below including beacon and data RSSI, BSSID, channel congestion and transmit and receive link rates.

octoScope Pal web interface

octoScope Pal web interface

Here's a physical view of the TS-MESH module. That's a TL-SG1008PE PoE+ switch powering the quadAttens and Pals in the TS-MESH. There is also a TP-Link TL-SG108E not shown that was added to power other octoScope modules and support network connection for other parts of the system.

Closer view of TS-MESH module

Closer view of TS-MESH module

Computer

Since a computer is no longer needed on the client end (each Pal has its own processor), we've reassigned the two Dell Optiplex SFF machines to wired router test duties. A Lenovo T450S laptop (Intel Core i5-5200 @ 2.2 GHz, 8 GB RAM, Windows 10 Pro 64-bit) now runs the whole shebang. The inboard Intel gigabit Ethernet adapter is used for test traffic; a multi-homed Anker Y 3461 USB 3.0 Gigabit Ethernet adapter handles control and house LAN connection.

More Wireless

Zyxel logo

Wi-Fi Mesh System Secrets - Here's how to get the most out of your whole home mesh WiFi system.

Wi-Fi System Tools
Check out the new Wi-Fi System Charts, Ranker and Finder!

Featured Sponsors



Support Us!

If you like what we do and want to thank us, just buy something on Amazon. We'll get a small commission on anything you buy. Thanks!

Over In The Forums

I have a new (less than 1 week old) AC86U and am running 384.5 on it.Fairly plain vanilla config with the exception of adding several static IPs to DH...
Tim joined this forum on May 18th 2008. I assume that means that the forums were setup ten years ago (unless he was on a different platform before tha...
Is it possible to control LAN access via iptables? I have a bunch of IOT devices that I want to access the internet and (and this is the kicker) accep...
I have a pfSense box and need an 8-16 port managed switch to configure VLANS on both a wired network and a wireless AP. I would strongly prefer a POE ...
I recently enabled the statistics for traffic analyzer, and in the list of clients I was seeing this mac address I couldn't find on my network , I fou...

Don't Miss These

  • 1
  • 2
  • 3