Like every other website on the planet, SmallNetBuilder uses cookies. Our cookies track login status, but we only allow admins to log in anyway, so those don't apply to you. Any other cookies you pick up during your visit come from advertisers, which we don't control.
If you continue to use the site, you agree to tolerate our use of cookies and not to sue us. Thank you!

Router Charts

Click for Router Charts

Router Ranker

Click for Router Ranker

NAS Charts

Click for NAS Charts

NAS Ranker

Click for NAS Ranker

More Tools

Click for More Tools

Wireless News

A key compromise reached in Draft 2.0 was to require that products operating in the 2.4 GHz band default to using the standard 20 MHz channel width that is backward-compatible with the majority of the 802.11b and g Wi-Fi networks in operation today. All Draft 2.0 Certified wireless access points and routers are supposed to "out of the box" power up using the compatible 20 MHz channel width mode.

The hole was discovered by SmallNetBuilder's Tim Higgins while testing a soon-to-be-released wireless router that had received Wi-Fi Draft 2.0 Certification. It was found that the router defaulted to using channel-bonded operation in the 2.4 GHz band, which was confirmed by monitoring the channels acutally used during the test. Higgins contacted the product vendor, who confirmed that the product had indeed passed Wi-Fi Certification.

Higgins' then passed his findings to Wi-Fi Alliance Lab personnel. They confirmed that the Draft 2.0 test plan specified that the use of 20 MHz channel bandwidth in the 2.4 GHz band was mandatory. But they also said that there was, in fact, no actual test performed to confirm compliance.

SmallNetBuilder requires that draft 11n products that it tests be Wi-Fi Draft 2.0 Certified. The unreleased product is the only Wi-Fi Certified product found to date to violate the Alliance's Certification 20 MHz mode "out of the box" requirement.

The Wi-Fi Alliance initiated its Draft 2.0 Certification program in June of this year to ensure product compliance with the interim draft standard. Products must pass an extensive test suite that is administered only in Wi-Fi Authorized Test Labs.

The Wi-Fi Alliance has not yet responded to a request for comment.

More Wireless

Zyxel logo

Wi-Fi Mesh System Secrets - Here's how to get the most out of your whole home mesh WiFi system.

Wi-Fi System Tools
Check out the new Wi-Fi System Charts, Ranker and Finder!

Featured Sponsors




Support Us!

If you like what we do and want to thank us, just buy something on Amazon. We'll get a small commission on anything you buy. Thanks!

Over In The Forums

After upgrading to 384.5 my OpenVPN servers are irresponsive. Before, the connections worked fine, with access to both LAN and WAN.- I have fully reco...
When I am in the router UI, it goes back to login page every few minutes and I see this in the logs.. an ideas? It does not seem like the internet con...
Instead of andriod-349489853, I want to call the device (change the host-name) Ashleys-Phone.I see there are several places but I am unsure if they do...
Neil62 said:↑ My current AiMesh setup is as follows:Main Router RT-AC5300Nodes:1xAC53001xAC86U1xAC68UUpgraded Main router and 1xNode (RT-AC5300) via ...
Hello,I have an AC1900P (RT-AC68U) on Merlin firmware RT-AC68U_384.5_0I have three questions regarding the Client Listing.1. Wireless Guest Network cl...

Don't Miss These

  • 1
  • 2
  • 3