Like every other website on the planet, SmallNetBuilder uses cookies. Our cookies track login status, but we only allow admins to log in anyway, so those don't apply to you. Any other cookies you pick up during your visit come from advertisers, which we don't control.
If you continue to use the site, you agree to tolerate our use of cookies. Thank you!

Router Charts

Click for Router Charts

Router Ranker

Click for Router Ranker

NAS Charts

Click for NAS Charts

NAS Ranker

Click for NAS Ranker

More Tools

Click for More Tools

Wireless News

The CL1300 WiFi System on a Chip uses Celeno's patent-pending "OptimizAIR" technology, which is built around standard 802.11 PHY and MAC layers. Proprietary enhancements at the PHY, MAC, Networking and Application networking layers are said to support a range of "over 50 meters through multiple walls and ceilings with enough throughput for 4 HD streams and with no packets loss or visual artifacts". The company said that the CL1300 "also demonstrates superior performance with third party client chipsets, 802.11a/b/g or 802.11n and even with very low-cost single antenna client designs".

Celeno’s new CL1300 technology will debut next week at IBC Amsterdam. The CL1300 and various reference designs are now available and shipping. Cisco will also demonstrate at IBC applications enabled by Celeno’s WiFi technology.

More Wireless

Wi-Fi System Tools
Check out our Wi-Fi System Charts, Ranker and Finder!

Support Us!

If you like what we do and want to thank us, just buy something on Amazon. We'll get a small commission on anything you buy. Thanks!

Over In The Forums

Greetings,I have a AiMesh Network comprised of three RT-AC68Us. I am running the current firmware on all three RT-AC68Us.Due to some stability issues,...
Hi,Before I had one time where after a power outage config. reset to factory defaults... (just flashed config. and solved it)But this time was differe...
View attachment 18716 ‚Äč CableLabs is pitching a Dual Channel Wi-Fi (DCW) specification that uses a hidden channel for downlink-only traffic and a sec...
This has been an issue ever since i got X4S be it stock firmware or Voxel's. You would think with the MAC address the setting would stick but it keeps...
I want to first of all thank my Loyal followings of #Nobody.Here is another @SomeWhereOverTheRainBow thread-cast#my-first-one-everList of things neede...

Don't Miss These

  • 1
  • 2
  • 3