Like every other website on the planet, SmallNetBuilder uses cookies. Our cookies track login status, but we only allow admins to log in anyway, so those don't apply to you. Any other cookies you pick up during your visit come from advertisers, which we don't control.
If you continue to use the site, you agree to tolerate our use of cookies. Thank you!

Router Charts

Click for Router Charts

Router Ranker

Click for Router Ranker

NAS Charts

Click for NAS Charts

NAS Ranker

Click for NAS Ranker

More Tools

Click for More Tools

Wireless News

NETGEAR WN3000RP Universal WiFi Range Extender NETGEAR has released a new wireless range extender.

The WN3000RP Universal WiFi Range Extender increases the coverage of home networks by automatically repeating the wireless signal from a Wi-Fi router or gateway.

The extender is a compact, self-contained unit that plugs into any AC outlet and repeats the signal from any 2.4 GHz wireless router or access point. It does not require routers to support WDS.

The Extender can also be used as a wireless Ethernet bridge by connecting a device or switch via the 10/100 Ethernet port.

It supports Wi-Fi Protected Setup and will automatically set up a secure connection via a push-button WPS session with a WPS router or AP. Manual WEP, WPA and WPA2 encryption can also be set up.

The adapter includes LED indicators to help find the best location for WN3000RP.

The WN3000RP is available now for $89.99 MSRP.

More Wireless

Wi-Fi System Tools
Check out our Wi-Fi System Charts, Ranker and Finder!

Support Us!

If you like what we do and want to thank us, just buy something on Amazon. We'll get a small commission on anything you buy. Thanks!

Over In The Forums

New firmware for the GT-AC5300 — which is great timing, as mine just arrived today. Changelog reads:ASUS GT-AC5300 Firmware version 3.0.0.4.384.457132...
Besides tweaks to the software, is it more stable than official Asus firmware?Thoughts on both?
If anyone is interested in a good working factory reset n66u with merlin ping me..just upgraded to an ac86u and have no use for it.
I have an Asus RT-AC68U router. I am largely (not entirely) using default settings, and am using 5ghz wireless only (2.4ghz is turned off). I have Cha...
Is there a way to tell which clients are connected via capable? I have 384.10_2 and using the Display low level details I think its missing it. Thanks...

Don't Miss These

  • 1
  • 2
  • 3