Like every other website on the planet, SmallNetBuilder uses cookies. Our cookies track login status, but we only allow admins to log in anyway, so those don't apply to you. Any other cookies you pick up during your visit come from advertisers, which we don't control.
If you continue to use the site, you agree to tolerate our use of cookies. Thank you!

Router Charts

Click for Router Charts

Router Ranker

Click for Router Ranker

NAS Charts

Click for NAS Charts

NAS Ranker

Click for NAS Ranker

More Tools

Click for More Tools

Wireless News

NETGEAR WNDR3800NETGEAR has released a dual-band N router with built-in cloud file sharing.

The WNDR3800 N600 Wireless Dual Band Gigabit Router – Premium Edition is the first to support the company's new ReadySHARE Cloud service.

ReadySHARE Cloud shares a USB hard or flash drive plugged into router's USB port both locally and remotely via the Internet. Shared files can be accessed from computers and via iOS and Android apps.

The WNDR3800 runs on a hardware platform using a 680 MHz Qualcomm / Atheros processor, 16 MB of flash, 128 MB of RAM and dual Qualcomm / Atheros radios. Other features include Clear Channel Selector, USB printer sharing, parental controls and wireless guest network support.

NETGEAR WNDR3800 info

In addition to cloud sharing, USB storage is also supported for UPnP / DLNA media serving and TiVo expansion storage.

The WNDR3800 is available now with street pricing around $150 and iOS and Android ReadySHARE Cloud apps at $2.99 each.

More Wireless

Wi-Fi System Tools
Check out our Wi-Fi System Charts, Ranker and Finder!

Support Us!

If you like what we do and want to thank us, just buy something on Amazon. We'll get a small commission on anything you buy. Thanks!

Over In The Forums

Hi all,I have overgrown my number of devices that I can connect to my AC68U running Merlin's 384.13. So going to buy a GS305E switch. In terms of netw...
Hi, Any one can help to take a look the log file. I just bought it 2 - 3 days ago. It was running ok until I decided power cycle it. After the router ...
What is the command in the CLI to set spanning tree bridge priority? I'm hoping that STP is not just limited to ON or OFF.
Hi all,Hoping someone can help me out as I'm usually quite clued up with internet setups but I've moved house to a total not-spot. 1.3mb DSL, no fiber...
I'm using firmware 384.13QOS mode is set to bandwidth limitation.I have one station that has "Steam" on it. To avoid it taking the entire bandwidth I ...

Don't Miss These

  • 1
  • 2
  • 3