Like every other website on the planet, SmallNetBuilder uses cookies. Our cookies track login status, but we only allow admins to log in anyway, so those don't apply to you. Any other cookies you pick up during your visit come from advertisers, which we don't control.
If you continue to use the site, you agree to tolerate our use of cookies. Thank you!

Router Charts

Click for Router Charts

Router Ranker

Click for Router Ranker

NAS Charts

Click for NAS Charts

NAS Ranker

Click for NAS Ranker

More Tools

Click for More Tools

Wireless News

Cisco logoCisco has officially announced a simultaneous dual-band 802.11abgn router supporting three-stream N on both bands.

The E4200V2 Maximum Performance Dual-Band N N900 Router, which has been on store shelves and up on Cisco's Home Products website for about a week, differs more from its predecessor than its name implies.

Thecus N4100EVO

The V2 has a 1.2 GHz processor vs. the V1's 533 MHz and uses Marvell three-stream N radios on both bands. The V1 uses Broadcom radios and supports three-stream N on only the 5 GHz band.

The V2 has all the V1's other features including one WAN and four switched LAN Gigabit Ethernet ports, USB 2.0 port for storage and printer sharing and built-in UPnP AV server. The V2 also supports IPv6.

Cisco also launched the "first in a series" of new mobile apps for Linksys E-Series and X-Series wireless routers called Cisco Connect Express. The mobile app helps users to remotely monitor and make changes to their home network.

The E4200V2 is available now at a $199.99 MSRP. The MSRP of the original E4200 is now $159.99 $179.99. The Cisco Connect Express app is now available for no charge at the Apple App Store or Android Market.

More Wireless

Wi-Fi System Tools
Check out our Wi-Fi System Charts, Ranker and Finder!

Support Us!

If you like what we do and want to thank us, just buy something on Amazon. We'll get a small commission on anything you buy. Thanks!

Over In The Forums

Hello.Currently at Traffic Analyzer -> Statistic -> Top 5 the pie chart shows only 5 devices, which is a little misleading (arguably useless) because ...
I have been trying to get plex installed and to no avail.is there a manual way with telnet to get it installedthe gui gets an unknown error at the bot...
Hi all,just upgraded our fibre broadband from 500mbs to the new 1gig service, which comes with the new Superhub 4. Always used our previous 500 servic...
Apologies if this has been asked, but is it possible to import Merlin settings (i.e. AC5300) to a non-Merlin device (i.e. AX11000)?I don't want to go ...
Since increasing the memory on an HP Gen 8 Microserver from 4Gb to 8Gb the micro-server refused to boot from the sdcard which had previously worked.Si...

Don't Miss These

  • 1
  • 2
  • 3