Like every other website on the planet, SmallNetBuilder uses cookies. Our cookies track login status, but we only allow admins to log in anyway, so those don't apply to you. Any other cookies you pick up during your visit come from advertisers, which we don't control.
If you continue to use the site, you agree to tolerate our use of cookies. Thank you!

Router Charts

Click for Router Charts

Router Ranker

Click for Router Ranker

NAS Charts

Click for NAS Charts

NAS Ranker

Click for NAS Ranker

More Tools

Click for More Tools

Wireless News

Amped Wireless LogoAmped Wireless said it has started to ship its new high-power wireless router.

The R10000G High Power Wireless-N 600mW Gigabit Router uses the same approach as Amped's previously announced R10000 High Power Wireless-N 600mW Smart Router and SR10000 High Power Wireless-N 600mW Smart Repeater.

Transmit power amplifiers and low noise receive amplifiers are combined with 5dBi antennas to provide extended range.

Amped Wireless R10000G High Power Wireless-N 600mW Gigabit Router

The single-band 2.4 GHz R1000G's features include one WAN and four switched LAN 10/100/1000 Ethernet ports, dual detachable 5 dBi antennas and SPI+NAT firewall with parental controls. Wireless features include MAC address filtering, four guest networks, Wi-Fi Protected setup and WEP/WPA/WPA2 security.

The R10000G has a retail price of $149.99 and is available now.

More Wireless

Wi-Fi System Tools
Check out our Wi-Fi System Charts, Ranker and Finder!

Support Us!

If you like what we do and want to thank us, just buy something on Amazon. We'll get a small commission on anything you buy. Thanks!

Over In The Forums

i'm trying to run an aimesh of two 86u's and one 68u. so i setup my old and trusty 86u as a main and the two other routers as nodes. everything goes w...
Hi, I'm new around here.I have this configuration:Router ISP: Bridge mode (192.168.0.1)Router ASUS AC68U :Firmware: Asuswrt-Merlin 834.13 (Thank you M...
Hi, I have a question around multi-subnet environment and routing via OpenVPN on Merlin. I have a few internal networks for desktop, vms and wifi clie...
Hi, I can not use IGMP proxy on my AX88U with the last Merlin firmware, I got this message : "Due to hardware limitation, IGMP proxy cannot co-exist w...
My custom VPN configuration would be 577 bytes long.However, this does not fit completely into the input field.I just happened to see that because a s...

Don't Miss These

  • 1
  • 2
  • 3