Like every other website on the planet, SmallNetBuilder uses cookies. Our cookies track login status, but we only allow admins to log in anyway, so those don't apply to you. Any other cookies you pick up during your visit come from advertisers, which we don't control.
If you continue to use the site, you agree to tolerate our use of cookies. Thank you!

Router Charts

Click for Router Charts

Router Ranker

Click for Router Ranker

NAS Charts

Click for NAS Charts

NAS Ranker

Click for NAS Ranker

More Tools

Click for More Tools

Wireless News

NETGEAR logoNETGEAR has begun shipments of a simultaneous dual-band wireless extender and bridge it announced at CES.

The WNR2500RP Universal Dual Band WiFi Range Extender is the first extender/bridge to have two 802.11n radios. These allow one radio to link to a base router/AP and the other to provide extended wireless coverage without the 50% throughput reduction imposed by single-radio extenders.

The product can function as a repeater or a wireless bridge with its built-in four-port 10/100 switch. It will connect to any 802.11abgn router/AP since it does not require WDS repeating/bridging support.

NETGEAR WNR2500RP callouts

The WNR2500RP is shipping now for $79.99 MSRP.

More Wireless

Wi-Fi System Tools
Check out our Wi-Fi System Charts, Ranker and Finder!

Support Us!

If you like what we do and want to thank us, just buy something on Amazon. We'll get a small commission on anything you buy. Thanks!

Over In The Forums

Hello all,A couple of problems have developed with my AC86U, running 384.14_2.Firstly, I have a USB pen drive plugged into the USB 2.0 port, which hos...
Hello,I am using an old Merlin firmware on my RT-N66U Assus router: 3.0.0.4.374.34_2 (Merlin build).Since this is a very old version and updated firmw...
Hello,I have been away from this forum for a few years since I had decided togo back to Asus stock firmware for various ASUS routers namely these whic...
Hi I upgraded to firmware version 3.0.0.4.384_81981 today and I am experiencing lots of disconnections/reboots. Output from the log attached. If any...
I'm running an AiMesh setup with one RT-AX88U as main and one AC86U and AC68U as nodes. Backhaul is wireless. All three running 384.14 beta 3 firmware...

Don't Miss These

  • 1
  • 2
  • 3