Like every other website on the planet, SmallNetBuilder uses cookies. Our cookies track login status, but we only allow admins to log in anyway, so those don't apply to you. Any other cookies you pick up during your visit come from advertisers, which we don't control.
If you continue to use the site, you agree to tolerate our use of cookies. Thank you!

Router Charts

Click for Router Charts

Router Ranker

Click for Router Ranker

NAS Charts

Click for NAS Charts

NAS Ranker

Click for NAS Ranker

More Tools

Click for More Tools

Wireless News

Ubiquiti logoUbiquiti has announced a new wireless management OS and draft 802.11ac access point to go with it.

The new UniFi 3.0 platform includes a new draft 802.11ac access point, upgraded management software and what Ubiquiti calls "Zero-Handoff" roaming technology. Zero-Handoff is handled by the management software at the AP level. Special client software is not needed.

The access point is based on Broadcom's new dual-core chipset and simultaneously supports link rates up to 1300 Mbps in 5 GHz and 450 Mbps in 2.4 GHz. It has a Gigabit LAN connection and can be powered by a separate power supply or Power over Ethernet.

Ubiquiti UniFi 3.0 draft 802.11ac access point

Ubiquiti UniFi 3.0 draft 802.11ac access point

The new APs are priced at $299, with first shipments starting in April and volume shipments by May. UniFi 3.0 software can be downloaded for free starting April 15. Ubiquiti is also offering one free new AP for Aruba and Ruckus customers as a "competitive upgrade".

More Wireless

Wi-Fi System Tools
Check out our Wi-Fi System Charts, Ranker and Finder!

Support Us!

If you like what we do and want to thank us, just buy something on Amazon. We'll get a small commission on anything you buy. Thanks!

Over In The Forums

Hello Snb community !I am new to Routers, Assus and Merlin, If i may I have a question for the community.I understand how to locate and Install softwa...
Of course you can open the WebUI to get your public ip address, but how about getting it programmatical?Actually, it's simple, just add this line to '...
Hello. I use Merlin 384.13. Is there a way to enter a system command? I understand Merlin is not WRT however to clarify what I am talking about on WRT...
Hi all,I just moved into a new 2-story house with pre-existing coaxial wiring, but its not wired with CAT5 like my old place. My current setup is:Arr...
I have been tethering for years with no problem on an AC56U using a Samsung J7 on Android 7.x.x.I then swapped to an LG V30 with Android 8.0.0 and all...

Don't Miss These

  • 1
  • 2
  • 3