Like every other website on the planet, SmallNetBuilder uses cookies. Our cookies track login status, but we only allow admins to log in anyway, so those don't apply to you. Any other cookies you pick up during your visit come from advertisers, which we don't control.
If you continue to use the site, you agree to tolerate our use of cookies. Thank you!

Router Charts

Click for Router Charts

Router Ranker

Click for Router Ranker

NAS Charts

Click for NAS Charts

NAS Ranker

Click for NAS Ranker

More Tools

Click for More Tools

Wireless News

Quantenna logoQuantenna is laying claim to producing the "world's first" fastest 802.11ac chipset.

Quantenna's QSR1000 is a 4x4 chipset that moves the current top draft 802.11ac link rate of 1300 Mbps up to 1730 Mbps.

The company says the QSR1000 supports the "latest Wave 2 802.11ac specification". "Wave 2" is a term referring to the upcoming generation of 4x4 802.11ac products that support up to four spatial streams. "Wave 2" products will allegedly support maximum link rates up to 3.6 Gbps, but only if 160 MHz (eight 5 GHz channels) are available for use.

Quantenna's new chipset uses four spatial streams, but stays with using only 80 MHz (four channels) of 5 GHz bandwidth.

802.11ac Scope and Waves

802.11ac Scope and Waves
Courtesy Cisco Blog

Another key distinction of Quantenna's new chipset is that it is the first announced to support multi-user MIMO (MU-MIMO). MU-MIMO lets transmit / receive channels in a single access point or wireless router be separated to support multiple, individual wireless clients (STAs).

MU-MIMO is seen as key to supporting the wave of 802.11ac-enabled mobile devices that will soon be hitting a network near you. Since most smartphones and tablets have only a single antenna and radio, they basically waste much of an 802.11ac AP's value by only using one of the three radios in today's AC1750 class products. Quantenna's chipset will essentially convert a single AP or wireless router into four AC433 class single-stream APs, immediately increasing network capacity and efficiency.

The QSR1000 is sampling now and reference designs are available. The company said that "major OEMs are already using the reference designs to develop access points, gateways and client consumer devices".

 

More Wireless

Wi-Fi System Tools
Check out our Wi-Fi System Charts, Ranker and Finder!

Support Us!

If you like what we do and want to thank us, just buy something on Amazon. We'll get a small commission on anything you buy. Thanks!

Over In The Forums

Hello, i have the problem that my RT-AC86U is boot looped. The router reboots automatically every day and sometimes i already had the problem that it ...
Hi I want to connect Netflix in Germany, country currently I'm living allows Netflix but the content is censored. I have a cyberghostvpn account and I...
I rebooted my 86U this morning, and noticed that after the reboot, I was unable to connect to the openvpn server and was getting an auth failed error ...
Not seen this before, and this new router blocked my phones today, was getting authentication error. Deleted phones wifi added new entry, nope would ...
Ever since I installed Tapatalk on my phone to see what it’s all about, I’ve been amazed at the traffic/activity I’ve been getting notified about. It’...

Don't Miss These

  • 1
  • 2
  • 3