Like every other website on the planet, SmallNetBuilder uses cookies. Our cookies track login status, but we only allow admins to log in anyway, so those don't apply to you. Any other cookies you pick up during your visit come from advertisers, which we don't control.
If you continue to use the site, you agree to tolerate our use of cookies. Thank you!

Router Charts

Click for Router Charts

Router Ranker

Click for Router Ranker

NAS Charts

Click for NAS Charts

NAS Ranker

Click for NAS Ranker

More Tools

Click for More Tools

Wireless News

NETGEAR logoNETGEAR has announced a PoE-powered N300 small-biz access point.

The NETGEAR WN203 ProSAFE Single-Band Wireless-N Access Point is a 2.4 GHz N300 class access point aimed at small business buyers. It includes dual internal antennas and two RP-SMA connectors for adding optional higher-gain external antennas.

Dual switched Gigabit Ethernet ports support 802.3af Power over Ethernet and LAN connection. The AP can also be powered by an included DC power supply.

NETGEAR WN-203

NETGEAR WN-203

Other features include WEP / WPA / WPA2 Personal and Enterprise wireless security, eight SSIDs, VLAN support, MAC address filtering, wireless client mode, bandwidth management and WDS bridging and repeating.

The WN203 is shipping now at a $145 MSRP and carries a lifetime hardware warranty and 24x7 tech support.

More Wireless

Wi-Fi System Tools
Check out our Wi-Fi System Charts, Ranker and Finder!

Support Us!

If you like what we do and want to thank us, just buy something on Amazon. We'll get a small commission on anything you buy. Thanks!

Over In The Forums

Besides tweaks to the software, is it more stable than official Asus firmware?Thoughts on both?
New firmware for the GT-AC5300 — which is great timing, as mine just arrived today. Changelog reads:ASUS GT-AC5300 Firmware version 3.0.0.4.384.457132...
If anyone is interested in a good working factory reset n66u with merlin ping me..just upgraded to an ac86u and have no use for it.
I have an Asus RT-AC68U router. I am largely (not entirely) using default settings, and am using 5ghz wireless only (2.4ghz is turned off). I have Cha...
Is there a way to tell which clients are connected via capable? I have 384.10_2 and using the Display low level details I think its missing it. Thanks...

Don't Miss These

  • 1
  • 2
  • 3