Like every other website on the planet, SmallNetBuilder uses cookies. Our cookies track login status, but we only allow admins to log in anyway, so those don't apply to you. Any other cookies you pick up during your visit come from advertisers, which we don't control.
If you continue to use the site, you agree to tolerate our use of cookies. Thank you!

Router Charts

Click for Router Charts

Router Ranker

Click for Router Ranker

NAS Charts

Click for NAS Charts

NAS Ranker

Click for NAS Ranker

More Tools

Click for More Tools

Wireless News

Amped Wireless logoAmped Wireless has announced its first draft 802.11ac router.

As it has with its other products, Amped is attempting to differentiate its RTA15 High Power 700mW Dual Band AC Wi-Fi Router by focusing on its transmit and receive amplifiers. And with its three 5 dBi external antennas, you might think it's an AC1750 class router.

But digging into the specs reveals that the RTA15 is an AC1200 class product supporting maximum link rates of 300 Mbps in the 2.4 GHz band and 867 Mbps in 5 GHz. It does have Gigabit WAN (1) and switched LAN (4) ports. But its single USB port that supports storage sharing is USB 2.0, not 3.0.

Amped Wireless RTA15

Amped Wireless RTA15

The router's RF stages feature a unique configuration that includes dual-stage transmit amplification for 5 GHz and single stage for 2.4 GHz. Receive amplifiers are also included for both bands. The three antennas are not all dual-band, but include one 2.4 GHz, one 5 GHz and one dual-band instead.

Amped says the RTA15 includes an updated user interface and supports guest networks (four per band), parental security and IPv6.

The RTA15 is up for pre-order now on Amped's website at a relatively-pricey $189.99 with shipments starting July 16.

More Wireless

Wi-Fi System Tools
Check out our Wi-Fi System Charts, Ranker and Finder!

Support Us!

If you like what we do and want to thank us, just buy something on Amazon. We'll get a small commission on anything you buy. Thanks!

Over In The Forums

So basically. When it came. Its still fine . I just connect it to the internet. Let it update the firmware. Then reset . Then I go set the router for ...
Hi Folks,This seems like the best place to ask. I upgraded from an R7000 (original AC1900 version) Nighthawk to the XR500. I wanted the R7800 hardware...
I tried to update my AC87U to 384.12 firmware and the router just doesn't survive from the update and settings process. I'm using the router in AP mod...
I am unsure which forum category this belongs in, so I am just putting it here in OTHER.I have an ASUS AC3100 and AT&T ZTE cellular modem. I am trying...
helloiam Portuguese, so my English is a little bad.i haver Merlin firmware, Router Asus rt ac86u, can I put 2 vlans on same port? example I need vlan ...

Don't Miss These

  • 1
  • 2
  • 3