Like every other website on the planet, SmallNetBuilder uses cookies. Our cookies track login status, but we only allow admins to log in anyway, so those don't apply to you. Any other cookies you pick up during your visit come from advertisers, which we don't control.
If you continue to use the site, you agree to tolerate our use of cookies. Thank you!

Router Charts

Click for Router Charts

Router Ranker

Click for Router Ranker

NAS Charts

Click for NAS Charts

NAS Ranker

Click for NAS Ranker

More Tools

Click for More Tools

Wireless News

NETGEAR logoNETGEAR has added two cable modem N class wireless routers.

The C3700 N600 Dual-Band WiFi Cable Modem Router and C3000 N300 WiFi Cable Modem Router integrate 8x4 CableLabs-certified DOCSIS 3.0 cable modems into N600 and N300 class routers.

The C3700 supports simultaneous dual-band link rates of up to 300 Mbps in each band, while the C3000 supports the same link rate in 2.4 GHz only.

NETGEAR C3000 / C3700 WiFi Cable Modem Router

NETGEAR C3000 / C3700 WiFi Cable Modem Router

Common features include:

  • Two switched Gigabit Ethernet LAN ports
  • One USB 2.0 port supporting READYSHARE USB storage sharing
  • Parental controls
  • Wireless guest networks
  • Wi-Fi and Power switches
  • NETGEAR Genie app support
  • IPv6 support

The C3700 and C3000 are available now at MSRPs of $129.99 and $99.99, respectively.

More Wireless

Wi-Fi System Tools
Check out our Wi-Fi System Charts, Ranker and Finder!

Support Us!

If you like what we do and want to thank us, just buy something on Amazon. We'll get a small commission on anything you buy. Thanks!

Over In The Forums

Hey all,I'm finally redoing my home network with Ubiquiti Gear (UDM, Flex, Nano, Switches). I'm largely up and running, minus my second floor AP (Nano...
Trying to figure out what is going on....hundreds of these occurring. I have AiMesh active with one main router and two nodes. Does this have anything...
I'm into IoT and home automation, but I'm embarrassed to admit I've rather ignored the security aspects of my home network so far. I'd be really grate...
Hi VoxelIs there any possibility to have BBR Congestion Protocol running in your firmware? Thanks in advance for such amazing effort you put in this m...
I thought guest network have a separate bandwidth limiter but not the case with latest merlins build..if thats the case are these any workarounds for ...

Don't Miss These

  • 1
  • 2
  • 3