Like every other website on the planet, SmallNetBuilder uses cookies. Our cookies track login status, but we only allow admins to log in anyway, so those don't apply to you. Any other cookies you pick up during your visit come from advertisers, which we don't control.
If you continue to use the site, you agree to tolerate our use of cookies. Thank you!

Router Charts

Click for Router Charts

Router Ranker

Click for Router Ranker

NAS Charts

Click for NAS Charts

NAS Ranker

Click for NAS Ranker

More Tools

Click for More Tools

Wireless News

NETGEAR logoNETGEAR publicly showed a four-stream AC2350 router last month.

SmallNetBuilder has learned that the R7500 Nighthawk X4 was shown at a NETGEAR seminar sponsored by XFastest.com held in Taipei at the end of May.

Presentation slides describe the R7500 as a Quad-stream Wi-Fi router running on a 1.4 GHz dual-core processor in contrast with the R7000, which is based on a 1 GHz Broadcom BCM4709A SoC. The R7500 has two USB 3.0 and one eSATA port for sharing storage and printers.

There is no mention in any of the presentation material of the chipsets used in the R7500 and the FCC photos are under short-term NDA until December. Both Quantenna and Qualcomm-Atheros have announced four-stream "Wave 2" 802.11ac chipsets supporting Multi-User MIMO (MU-MIMO) and ASUS' RT-AC87U uses Quantenna's chipset.

NETGEAR R7500 & R7000 Nighthawk routers

NETGEAR R7500 & R7000 Nighthawk routers
(Image credit: XFastest.com)

4x4 routers have been highly anticipated for their MU-MIMO feature. But that technology appears to be not yet fully baked, because the R7500 is described only as "MU-MIMO Ready".

The slide below and the FCC test report released on Tuesday confirm that the router operates in 4x4 mode only in 5 GHz to produce a maximum link rate of 1750 Mbps using 80 MHz channels. The 2.4 GHz radio is 3x3 only, but implements 265-QAM modulation to achieve a maximum 600 Mbps link rate with a 40 MHz wide channel.

NETGEAR R7500 details

NETGEAR R7500 details
(Image credit: XFastest.com)

There was no word on availability, but list price is set at $249.

NETGEAR R7500 & R7000 Nighthawk routers

NETGEAR R7500 & R7000 Nighthawk routers
(Image credit: XFastest.com)

So the question is, which will hit the market first, the AC2350 Nighthawk X4 R7500, or AC3200 Nighthawk X6? Or more to the point, which one would you choose?

More Wireless

Wi-Fi System Tools
Check out our Wi-Fi System Charts, Ranker and Finder!

Support Us!

If you like what we do and want to thank us, just buy something on Amazon. We'll get a small commission on anything you buy. Thanks!

Over In The Forums

I'm currently on Voxel's 1.0.2.68SF firmware version.In the VPN Service settings, both TUN and TAP ports are on UDP 12973 and 12974 respectively.I hav...
Hi All,Just a quick one. I have successfully installed the Voxel firmware for my R9000 using expressVPN.Everything actually seems to be working VPN wi...
11ax is supposed to address the problem of density.Does 11ax router really help if you have a whole house full of 11n 2.4ghz IoT devices?Personal expe...
Greetings.My log file is getting bombarded with successful Dropbear messages, everytime Home Assistant is checking on things (ssh is only open to LAN....
My RT-AC68P has two USB ports, one each 2.0 and 3.0. I have two flash drives, one USB 3.0 and the other not 3.0. If I plug the 3.0 drive into the 2.0 ...

Don't Miss These

  • 1
  • 2
  • 3