Like every other website on the planet, SmallNetBuilder uses cookies. Our cookies track login status, but we only allow admins to log in anyway, so those don't apply to you. Any other cookies you pick up during your visit come from advertisers, which we don't control.
If you continue to use the site, you agree to tolerate our use of cookies. Thank you!

Router Charts

Click for Router Charts

Router Ranker

Click for Router Ranker

NAS Charts

Click for NAS Charts

NAS Ranker

Click for NAS Ranker

More Tools

Click for More Tools

Wireless News

NETGEAR logoNETGEAR's announced its first 4x4 MU-MIMO router. But U.S. buyers will have to wait.

The D7800 Nighthawk X4S AC2600 WiFi VDSL/ADSL Modem Router is NETGEAR's first "Wave 2" MU-MIMO enabled router. It has a built-in DSL modem compatible with ADSL, ADSL2, ADSL2+, VDSL and VDSL2 connections, plus a Gigabit WAN port to support use with external modems.

The Qualcomm-based design has a dual core 1.4 GHz processor, four switched Gigabit Ethernet LAN ports and dual USB 3.0 and one eSATA ports supporting NETGEAR's ReadySHARE storage and printer sharing and DLNA and iTunes media servers.

The 4x4 design supports maximum link rates up to 800 Mbps in 2.4 GHz and 1733 Mbps in 5 GHz when used with clients capable of supporting those rates. The router also supports improved total bandwidth utilization when MU-MIMO capable devices are connected.

NETGEAR Nighthawk X4S

NETGEAR Nighthawk X4S

You won't be able to buy the D7800 Nighthawk X4S if you live in the U.S. But it's available now in Australia, and will launch in the UK and throughout Europe in mid-September. MSRPs are $529 (AUD), £269 (GBP) and €299 (EUR). No word from NETGEAR on when or if the D7800 will be offered in the U.S. or whether there will be a version without the built-in modem.

More Wireless

Wi-Fi System Tools
Check out our Wi-Fi System Charts, Ranker and Finder!

Support Us!

If you like what we do and want to thank us, just buy something on Amazon. We'll get a small commission on anything you buy. Thanks!

Over In The Forums

helloiam Portuguese, so my English is a little bad.i haver Merlin firmware, Router Asus rt ac86u, can I put 2 vlans on same port? example I need vlan ...
Hi Folks,This seems like the best place to ask. I upgraded from an R7000 (original AC1900 version) Nighthawk to the XR500. I wanted the R7800 hardware...
How would I go about adding support for my HE IPV6 tunnel to my VPN server, does anyone have any suggested articles to read, or simply any suggestions...
I've got a Zyxel GS1100-24 unmanaged 24 port Gb switch. It has the option for 2 extra ports that can use 1G copper SFP modules. I could use the two po...
One of the reasons I just bought an AC68U was because I wanted the Traffic Analyzer.Apparently enabling this requires "that your information will be c...

Don't Miss These

  • 1
  • 2
  • 3