Like every other website on the planet, SmallNetBuilder uses cookies. Our cookies track login status, but we only allow admins to log in anyway, so those don't apply to you. Any other cookies you pick up during your visit come from advertisers, which we don't control.
If you continue to use the site, you agree to tolerate our use of cookies. Thank you!

Router Charts

Click for Router Charts

Router Ranker

Click for Router Ranker

NAS Charts

Click for NAS Charts

NAS Ranker

Click for NAS Ranker

More Tools

Click for More Tools

Wireless News

TP-LINK logoTP-LINK's Archer C3150 was announced at CES 2016.

The Archer C3150 is basically a single 5 GHz radio version of the Archer C5400 that was also announced in January. It supports the same maximum link rates of 2167 Mbps in 5 GHz and 1000 Mbps on in 2.4 GHz. Of course, you need hard-to-find devices that support Broadcom's non-standard "NitroQAM" (1024 QAM) modulation to access those link rates.

The hardware platform includes a 1.4 GHz dual-core main processor, Wi-Fi co-processors in each of the two radios, Gigabit WAN (1) and switched LAN (4) ports and both USB 2.0 and 3.0 ports for storage and printer sharing.

Features include Broadcom's Smart Connect technology intended to automatically assign devices to the best radio, guest network and parental controls with internet access time control.

TP-LINK Archer C3150 Wireless Dual-Band Gigabit Router

TP-LINK Archer C3150 Wireless Dual-Band Gigabit Router

For now, the only way you can get an Archer C3150 is from Amazon for full MSRP of $219.99.

More Wireless

Wi-Fi System Tools
Check out our Wi-Fi System Charts, Ranker and Finder!

Support Us!

If you like what we do and want to thank us, just buy something on Amazon. We'll get a small commission on anything you buy. Thanks!

Over In The Forums

I recently had to login to my router because we had lost power and normally after doing that I have to go in and disable port forwarding for my intern...
Hello.Currently at Traffic Analyzer -> Statistic -> Top 5 the pie chart shows only 5 devices, which is a little misleading (arguably useless) because ...
I have been trying to get plex installed and to no avail.is there a manual way with telnet to get it installedthe gui gets an unknown error at the bot...
Hi all,just upgraded our fibre broadband from 500mbs to the new 1gig service, which comes with the new Superhub 4. Always used our previous 500 servic...
Apologies if this has been asked, but is it possible to import Merlin settings (i.e. AC5300) to a non-Merlin device (i.e. AX11000)?I don't want to go ...

Don't Miss These

  • 1
  • 2
  • 3