Like every other website on the planet, SmallNetBuilder uses cookies. Our cookies track login status, but we only allow admins to log in anyway, so those don't apply to you. Any other cookies you pick up during your visit come from advertisers, which we don't control.
If you continue to use the site, you agree to tolerate our use of cookies. Thank you!

Router Charts

Click for Router Charts

Router Ranker

Click for Router Ranker

NAS Charts

Click for NAS Charts

NAS Ranker

Click for NAS Ranker

More Tools

Click for More Tools

Wireless Reviews

Setup

Linksys says that the WET is "completely driver-free, so it works on any platform and under any operating system", but the WET experience is not plug-it-in-and-go. Once you get it out of the box, you'll find that both the Quick Installation and User Guides direct you to run the Setup Wizard on the supplied CD. For that, you'll need a system running Windows!

Linksys WET54G - Setup Wizard scan result

Figure 1: Setup Wizard- System Scan result
(click on the image for a full-sized view)

Tip TIP: Although the Wizard doesn't need to be installed on a computer to run, you can copy the Setup.exe and BMPL.dll files from the CD to your hard drive if you tend to lose CDs...

Figure 1 shows the result of the Wizard's hunt for WETs on my network, but note that the settings are not the defaults. You can see that the Wizard showed both WETs that I was using to test out AdHoc mode and that I could connect to either of them for configuration.

The wizard steps you through screens that allow you to:

  • Select AdHoc or Infrastructure mode
  • Set (E)SSID, Channel (AdHoc only), and Bridge Name
  • Manually set IP address, subnet and Gateway, or get that info from a DHCP server
  • Enable WEP and set one key using either a passphrase to generate a Hexadecimal key, or entering it directly.

When you've completed all the steps, the info is saved, thankfully without the need to cycle the power that was required by the WET11.

More Wireless

Wi-Fi System Tools
Check out our Wi-Fi System Charts, Ranker and Finder!

Support Us!

If you like what we do and want to thank us, just buy something on Amazon. We'll get a small commission on anything you buy. Thanks!

Over In The Forums

Download = https://www.asus.com/me-en/Networking/RT-AX88U/HelpDesk_Download/Changelog:ASUS RT-AX88U Firmware version 3.0.0.4.386.417001. AiMesh 2.0- S...
Hi all,I have a strange problem with my Asus router and a new nas drive the DS218 with 1 6TB hard drive, the problem is that i cannot transfer file's ...
Hello...I recently purchased the RT-AX88U, to replace my old Linksys router.After getting everything else working easily, I went to set up port-forwar...
Binance has so far concentrated on the Russian market, the stage is currently focusing on overall development. The various positive surveys on the pre...
Bitstamp has more than 700 million customers and therefore the quantity of help requests they get is shocking. If solitary 1 in every 100 customers co...

Don't Miss These

  • 1
  • 2
  • 3