Like every other website on the planet, SmallNetBuilder uses cookies. Our cookies track login status, but we only allow admins to log in anyway, so those don't apply to you. Any other cookies you pick up during your visit come from advertisers, which we don't control.
If you continue to use the site, you agree to tolerate our use of cookies. Thank you!

Router Charts

Click for Router Charts

Router Ranker

Click for Router Ranker

NAS Charts

Click for NAS Charts

NAS Ranker

Click for NAS Ranker

More Tools

Click for More Tools

Wireless Reviews

Introduction

NETGEAR Prosafe Dual Band Wireless VPN Firewall (FWAG114)
Summary First dual-band tri-mode wireless router with Atheros-based 11a, b, and g radios and 2 tunnel IPsec VPN endpoint
Update None
Pros • Excellent 11a performance
• Separate b/g and a radios
• Superior 11g throughput vs. range
Cons • Does not play well with Broadcom 11g clients
• Non-upgradable antennas
• Wireless repeating and bridging not supported
• WPA not supported

NETGEAR Prosafe Dual Band Wireless VPN Firewall

I've waited a long time to get my hands on an Atheros-based 802.11g AP / router and NETGEAR finally obliged with the release of the FWAG114. I've always been impressed with Atheros' client performance in NETGEAR's WAB501 a/b [reviewed here] and WAG511 a/b/g [reviewed here] CardBus cards, and wanted to see if they could deliver the same goods on the AP end of things.

Basic Features

The FWAG is aimed at the "enterprise" crowd, so comes in NETGEAR's sturdy blue metal box instead of the plastic "Platinum" line enclosure used for consumer networking products. The box is pretty compact - about the size of a 200 page hardcover book - and has slots on its bottom for wall mounting.

All indicator lights are on the front of the box and are bright and viewable from a wide angle. Indicators include Link/Activity and 100Mbps for the four 10/100 ports and one 10/100 Ethernet WAN connection. There are also separate Activity and lights for the 802.11a and b/g radios and Power, and Test general indicators.

Four 10/100 LAN ports, one 10/100 WAN port and power jack are on the rear panel, along with the Reset-to-Factory-Defaults switch. Note that all LAN ports are auto MDI / MDI-X which means they'll figure out how to connect to whatever you plug into them, including switches or hubs if you decide to expand the number of ports.

More Wireless

Wi-Fi System Tools
Check out our Wi-Fi System Charts, Ranker and Finder!

Support Us!

If you like what we do and want to thank us, just buy something on Amazon. We'll get a small commission on anything you buy. Thanks!

Over In The Forums

Running 384_12 (latest stable) on an AC88 with Diversion & Skynet with 2GB swap file. Had a crash (early in the morning hours with no load):kernel: Ou...
My ISP has provided me with a CISCO EPC3928S modem/router. I have this set to Bridged mode and handle routing on my internal network using my ASUS AC6...
Hi, just got the subject error while running a 'robocopy' backup script against a samba shared drive on my rt-ax88u. I am not posting this in the alph...
Hi do anyone know is there difference when the aimesh node logo turn blue or just normal color?It is because i always lost my aimesh node (lost connec...
Ramblings of an Old Man … RuckusWhere else can an old man ramble on about computers and networks? (My wife tolerates it only to the point that it puts...

Don't Miss These

  • 1
  • 2
  • 3