Like every other website on the planet, SmallNetBuilder uses cookies. Our cookies track login status, but we only allow admins to log in anyway, so those don't apply to you. Any other cookies you pick up during your visit come from advertisers, which we don't control.
If you continue to use the site, you agree to tolerate our use of cookies. Thank you!

Router Charts

Click for Router Charts

Router Ranker

Click for Router Ranker

NAS Charts

Click for NAS Charts

NAS Ranker

Click for NAS Ranker

More Tools

Click for More Tools

Wireless Reviews

Introduction

3Com OfficeConnect Wireless 54Mbps 11g Travel Router

3Com OfficeConnect Wireless 54Mbps 11g Travel Router (3CRTRV10075)
Summary Mini 11g router aimed at traveling pros. No WDS or router port forwarding or filtering. Wireless LAN clients only.

NETGEAR 54 Mbps Cable/DSL Wireless Travel Router

NETGEAR 54 Mbps Cable/DSL Wireless Travel Router (WGR101)
Summary Mini 11g router aimed at traveling pros. Supports Router, AP and AP client modes plus WPA security

The mini-AP trend that ASUS started with its WL-330 [reviewed here] and WL-330g [reviewed here] "Pocket" access points has gone mainstream. In this Head To Head review, I'll look at two "Travel Routers" from 3Com and NETGEAR that have a common hardware platform, but two distinctly different approaches for features and user interface.

More Wireless

Wi-Fi System Tools
Check out our Wi-Fi System Charts, Ranker and Finder!

Support Us!

If you like what we do and want to thank us, just buy something on Amazon. We'll get a small commission on anything you buy. Thanks!

Over In The Forums

New firmware for the GT-AC5300 — which is great timing, as mine just arrived today. Changelog reads:ASUS GT-AC5300 Firmware version 3.0.0.4.384.457132...
Besides tweaks to the software, is it more stable than official Asus firmware?Thoughts on both?
If anyone is interested in a good working factory reset n66u with merlin ping me..just upgraded to an ac86u and have no use for it.
I have an Asus RT-AC68U router. I am largely (not entirely) using default settings, and am using 5ghz wireless only (2.4ghz is turned off). I have Cha...
Is there a way to tell which clients are connected via capable? I have 384.10_2 and using the Display low level details I think its missing it. Thanks...

Don't Miss These

  • 1
  • 2
  • 3