Like every other website on the planet, SmallNetBuilder uses cookies. Our cookies track login status, but we only allow admins to log in anyway, so those don't apply to you. Any other cookies you pick up during your visit come from advertisers, which we don't control.
If you continue to use the site, you agree to tolerate our use of cookies. Thank you!

Router Charts

Click for Router Charts

Router Ranker

Click for Router Ranker

NAS Charts

Click for NAS Charts

NAS Ranker

Click for NAS Ranker

More Tools

Click for More Tools

Wireless Reviews

Video Test

Since Cisco's marketing for the WET6 says that "It's optimized for streaming video to reduce glitches", I thought I'd put that to the test. I linked the WET6 to a WRT400N, using WPA2/AES security, 5 GHz band and 40 MHz channel width. The WRT400N was located in my office (Location A) and linked to the WET6 in my living room (Location C). The WET6 was plugged into the Ethernet port on a Netgear EVA8000 [reviewed] connected to a Panasonic TH-50PX75U Plasma.

I used the same collection of 720p QuickTime HD trailers used in the HD Streaming Smackdown: Draft 11n vs. Powerline. I wasn't able to use 1080p clips because the EVA8000 won't play them without stuttering. (Netgear specs WMV up to 1080p, but doesn't say anything about H.264 or Quicktime HD.) Since I have found that the EVA8000 also stutters on some 720p QuickTime HD clips, I used only material that I verified played without problem over an Ethernet connection. All material was streamed from a NETGEAR NV+ that was connected directly into one of the WRT400N's LAN ports.

I wish that I could say that the WET6 performed flawlessly, but it didn't. The IxChariot throughput testing showed that I had an average of almost 40 Mbps of throughput available under the video test conditions. But it apparently was not enough (or stable) enough for the peak demands of the clips.

I should say, however, that the clips seemed to play for a bit longer through known peak demand spots where they usually start to stutter. But the clips did not make it through all of the rough spots, indicating insufficient bandwidth.

I'll also note that NETGEAR has released new firmware for the EVA8000 that I discovered and downloaded before I began this test. It contains lots of improvments for playing video in low bandwidth environments. It also now pauses the video when bandwidth drops below what's needed and puts up a message while it refills the buffer. While this is annoying, it's better than having a video continue to stutter once it starts because it can't catch up.

Closing Thoughts

The WET610N will probably replace the WGA600N "Gaming" adapter, since the two products are more alike than different and why would they need both? It's a good choice for a dual-band draft 11n adapter and could be a better choice than a USB adapter for connecting a desktop or a few Ethernet-only devices if you throw in a switch.

But if you're looking for the answer to your high-def video streaming needs, keep looking. Despite what Cisco's marketing material says, I didn't find that the WET610N provides any particular advantage for that application.

Check out the slideshow See the slideshow for an admin interface tour

More Wireless

Wi-Fi System Tools
Check out our Wi-Fi System Charts, Ranker and Finder!

Support Us!

If you like what we do and want to thank us, just buy something on Amazon. We'll get a small commission on anything you buy. Thanks!

Over In The Forums

If someone is using this on their local machine on the network, is there anyway of forcing them to use my dns servers or blocking it?
I know there are lots of experts on this forum, so I was wondering if anyone could help me with a problem related to my internet connection. The probl...
Yesterday I installed the Kamoj v5 add-on with my Voxel firmware v1.0.2.75.2. I had some trouble with the addin and wanted to remove it by reinstallin...
I’m hoping for some insight so I can clarify in my own head. Please bear with me. Both are methods of securing my LAN, both mitigate a dynamic WAN IP ...
Would this work?nvram set FORCE_AUTO_UPGRADE=nnvram commitrebootCC

Don't Miss These

  • 1
  • 2
  • 3