Like every other website on the planet, SmallNetBuilder uses cookies. Our cookies track login status, but we only allow admins to log in anyway, so those don't apply to you. Any other cookies you pick up during your visit come from advertisers, which we don't control.
If you continue to use the site, you agree to tolerate our use of cookies. Thank you!

Router Charts

Click for Router Charts

Router Ranker

Click for Router Ranker

NAS Charts

Click for NAS Charts

NAS Ranker

Click for NAS Ranker

More Tools

Click for More Tools

Wireless Reviews

The WZR-HP sits at the top of Buffalo's slimmed-down U.S. wireless product line. It's a single-band draft 802.11n router whose main claim to fame is higher transmit power than most other draft 11n routers and APs. The FCC test results show peak transmit power between 524 and 847 mW in 20 MHz bandwidth mode. By comparison, the popular D-Link DIR-655A4's peak transmit power is 97 mW.

The WZR-HP is built around an Atheros AR9132 Wireless Network Processor, which includes the wireless BB/MAC functions. The radio is an AR9103 3x3 2.4 GHz 802.11n. The WAN port and four LAN ports are handled by a Realtek RTL8366SR Gigabit switch that appears to have jumbo frames enabled for up to 9K.

Other attractive features of the router include support for three separately-secured SSIDs, a PPTP server for VPN connection and NAS function for an attached USB drive. The NAS features include user and group support, remote secure web-based file access and a BitTorrent download client. Our Vista SP1 file copy test measured write and read throughput of 9.7 and 10.9 MB/s with an XFS formatted drive, respectively—a bit better than most router-embedded NASes we've seen.

Routing throughput measured 166 Mbps WAN to LAN and 184 Mbps LAN to WAN. Maximum simultaneous sessions maxed out at our test limit of 200.

Maximum wireless throughput in the default 20 MHz bandwidth mode measured 59.3 Mbps at Location C running downlink and 61.4 Mbps uplink at Location A averaged over a 1 minute test. Switching to 40 MHz mode improved throughput to 97.2 and 85.9 Mbps for down and uplink, respectively (both at Location A).

It appears that the WZR-HP's higher transmit power in the 20 MHz bandwidth mode did help to improve throughput and connection reliability at our weak-signal test locations E and F. Speeds near 10 Mbps were measured, where most other routers provide only a few Mbps of throughput.

Read the full review.

More Wireless

Wi-Fi System Tools
Check out our Wi-Fi System Charts, Ranker and Finder!

Support Us!

If you like what we do and want to thank us, just buy something on Amazon. We'll get a small commission on anything you buy. Thanks!

Over In The Forums

Hello,I have an asus RT-AX88U router with the latest firmware 384.16.In the "AIProtection" preferences, the window is displayed incorrectly, the texts...
Hi,I have been testing latest firmwares and found that after a time 2.4ghz devices are being dropped, keeping 5ghz devices connected. This happens wit...
Hi - Is it possible to re-direct LAN clients/ports to an external authenticated socks5 proxy? I can't find any posts about this.
My aimesh node is hardwired. The primary router shows it as connection priority ethernet and connection type wired. But in my system log/wireless log,...
Hey guys, first post here. This will inevitably turn into a build thread, but I need information to start.I have an RV that is about 300ft from the ro...

Don't Miss These

  • 1
  • 2
  • 3