Like every other website on the planet, SmallNetBuilder uses cookies. Our cookies track login status, but we only allow admins to log in anyway, so those don't apply to you. Any other cookies you pick up during your visit come from advertisers, which we don't control.
If you continue to use the site, you agree to tolerate our use of cookies. Thank you!

Router Charts

Click for Router Charts

Router Ranker

Click for Router Ranker

NAS Charts

Click for NAS Charts

NAS Ranker

Click for NAS Ranker

More Tools

Click for More Tools

Wireless Reviews

Black Diamond Dual-Band Gigabit Wireless-N Router
At a glance
ProductASUS Black Diamond Dual-Band Gigabit Wireless-N Router (RT-N56U)   [Website]
SummarySimultaneous dual-band Ralink-based 802.11n Gigabit port router with HTTP / FTP / BitTorrent download and USB drive sharing
Pros• Ridiculously high routing throughput
• 2 USB 2.0 ports for sharing storage and printer
• WDS bridging and repeating
Cons• A few odd selections for wireless defaults
• No guest WLAN / multiple SSID

Typical Price: $57  Buy From Amazon

The RT-N56U is ASUS' new top-of-line wireless router. It is simultaneous dual-band 802.11n with four-port Gigabit switch and two USB 2.0 ports that support storage and printer sharing. It gets its "Black Diamond" nickname from the faceted diamond pattern on its front surface.

The router's packaging may not be to everyone's taste. It's designed to stand upright on the included stand as shown in the product shot above. But in real life all its connecting cables protrude unattractively from the right side.

The front panel holds USB, WAN and wireless indicators for the two radios. You'll have to look at the lights embedded in each of the Gigabit WAN and switched LAN ports for link status and activity.

ASUS RT-N56U ports and lights

ASUS RT-N56U ports and lights


Unlike ASUS' previous top-of-line single-band RT-N16U, which uses a Broadcom-based design, ASUS tapped Ralink to power the RT-N56U. Figure 1 shows all the components encased in an RF shield.

ASUS RT-N56U board

Figure 1: ASUS RT-N56U board

Figure 2 reveals some component details. A 500 MHz Ralink RT3662F SoC serves double duty as the main CPU and 5 GHz radio, while the Ralink RT3092 to its left provides the 2.4 GHz radio. A Realtek RTL8367 provides the four-port Gigabit switch and the single Gigabit WAN port. 128 MB of RAM and 8 MB of flash complete the design.

Note that while ASUS doesn't spec it, my tests revealed that the Gigabit switch passed 4K jumbo frames just fine. And the RTL8367 spec sheet confirms that it "supports 9216-byte jumbo packet length forwarding at wire speed".

ASUS RT-N56U board

Figure 2: ASUS RT-N56U board

This photo provides a closer view of some of the key components. Note that both radios feed a single set of three printed-circuit dual-band antennas. ASUS told me the 2.4 GHz radio uses two antennas (2T2R) and the 5 GHz radio uses three (2T3R) for a bit more receive gain.


Aside from having two radios to configure, the RT-N56U's feature set is essentially the same as ASUS' previous top-of-line single-band RT-N16U. So you can check that review for a detailed feature walkthrough and a peek at the web-based admin GUI. Figure 3 shows the main "Network Map" screen, with a USB drive attached. For those of you who care, there is no IPv6 support.

ASUS RT-N56U network map

Figure 3: ASUS RT-N56U network map

A key difference from the RT-N16 is that the USB sharing feature supports SMB file sharing as well as FTP. So shares will show up via network browsing with any device that supports SMB. There's also a built-in UPnP AV / DLNA media server. But there are no controls exposed for the server except for an enable / disable. Note also that if you're planning to use the HTTP, FTP, and BT "Download Master" feature, it's a Windows program, not built into the router.

I ran into a few oddities on the Wireless side. The router properly defaulted to 20 MHz bandwidth mode for the 2.4 GHz radio, with the 5 GHz radio defaulting to Auto 20/40 mode. But by default, both radios have the same ASUS SSID, making it impossible to force a dual-band client to a particular band.

The other questionable default is that Wi-Fi Protected Setup (WPS) is off. Enabling it was confusing because it appears that there is only one WPS setting for both radios. But when you bounce back and forth between the 2.4 GHz and 5 GHz screens if looks like you can enable WPS on both bands.

Enabling WPS appears to change the 5 GHz band SSID to be different from the 2.4 GHz radio's, so at least you can now select a band to connect to. I was able to successfully complete a WPS PIN session with my Win 7 client, which resulted in a WPA2 / AES secured connection.

The Professional tab of the Wireless settings shown in Figure 4 contains enable schedules for each radio as well as AP isolation (client separation) and the ability to flip numerous wireless function switches that are probably best left alone.

ASUS RT-N56U Wireless Professional Settings

Figure 4: ASUS RT-N56U Wireless Professional Settings

You won't find any Guest WLAN or multi-SSID features, however, which puts the RT-N56U at a disadvantage to other top-end simultaneous dual-band routers like the Cisco Linksys E4200 and NETGEAR WNDR3700.

More Wireless

Wi-Fi System Tools
Check out our Wi-Fi System Charts, Ranker and Finder!

Support Us!

If you like what we do and want to thank us, just buy something on Amazon. We'll get a small commission on anything you buy. Thanks!

Over In The Forums

Hi I know this might be a strange question but I'm trying to choose between the two routers. My priority is WiFi speed and range (the signal has to go...
Couldn't find a direct answer here and the ASUS support page only generically answered how to switch the operation mode. I have 2 AC3500, this setup w...
I've noticed some odd behavior on my router since upgrading to the 384.11 and _2 versions of the firmware on my AC86U in regards to my VPN. I have fiv...
Since updating to 384.11, I've been seeing lots of DNS errors. I have enabled DNS-over-TLS, but don't really understand optimal setup. What happens wi...
Never had this problem using AC87U, same setup same USB drive used.When I move the same file to WD network drive it's streaming fine.Any idea what can...

Don't Miss These

  • 1
  • 2
  • 3