Like every other website on the planet, SmallNetBuilder uses cookies. Our cookies track login status, but we only allow admins to log in anyway, so those don't apply to you. Any other cookies you pick up during your visit come from advertisers, which we don't control.
If you continue to use the site, you agree to tolerate our use of cookies. Thank you!

Router Charts

Click for Router Charts

Router Ranker

Click for Router Ranker

NAS Charts

Click for NAS Charts

NAS Ranker

Click for NAS Ranker

More Tools

Click for More Tools

Wireless Reviews

Wireless Performance - more

Here's the IxChariot plot for downlink, showing relatively stable throughput.

Draft 802.11ac throughput IxChariot plot - Linksys EA6500 - downlink

Draft 802.11ac throughput IxChariot plot - Linksys EA6500 - downlink

The uplink plot is very different. With a strong signal in Location A, the router shifts to a higher throughput level two times, peaking at around 600 Mbps (!) for a short time around 45 seconds into the run. It then falls back to bounce around the 300 Mbps line for awhile and then begin its upward climb again. I reran the test a few times and found a similar pattern each time.

Draft 802.11ac throughput IxChariot plot - Linksys EA6500 - uplink

Draft 802.11ac throughput IxChariot plot - Linksys EA6500 - uplink

I have seen other draft 11ac and N routers take awhile to shift up to their maximum throughput at the start of a test run. But I haven't seen the multiple shift, fallback and repeat pattern before.

Maximum 11ac Throughput

I ran our multi-pair test to see how throughput scales as more test scripts are run simultaneously. The plot below shows the EA6500 behaving more like the ASUS, with (just) over 400 Mbps of total throughput with one pair and total throughput peaking at four pairs. The EA6500 even beats the ASUS with a peak total throughput of 548 Mbps vs. 527.

Draft 11ac throughput vs. traffic pairs

Draft 11ac throughput vs. traffic pairs

Closing Thoughts

Our testing so far shows that the EA6500 has high routing throughput with plenty of simultaneous connections. But its storage filecopy performance doesn't set any records, especially if you write to it with a FAT32 formatted drive attached.

Since we don't test with a standard AC client, it's tough to say that one product is really better than another. But it seems like the ASUS RT-AC66U still holds the crown for best overall draft 11ac performance, especially as signal levels drop. With a strong signal, however, the EA6500 holds its own against not only the ASUS, but the Buffalo and NETGEAR AC routers too.

Part 2 of the review has the rest of the wireless test results so that you can decide if the EA6500 is the draft 11ac router for you.

More Wireless

Wi-Fi System Tools
Check out our Wi-Fi System Charts, Ranker and Finder!

Support Us!

If you like what we do and want to thank us, just buy something on Amazon. We'll get a small commission on anything you buy. Thanks!

Over In The Forums

Asus RTN66U Merlin Firmware:3.0.0.4.374.39 1 SD 8gigas card intalled ext2 formated 2 USB disk NTFS Formated JFFS is on Installed entware on the sd c...
Hello.I need cfe and nvram partition for DSL-AC68U router for debricking it.On worked device you can make it on SSH console on router.Just type for ex...
Hi There,Update 2020/08/06386 rc2-3 firmware is in this linkhttps://drive.google.com/drive/folders/154vHdrYh_rGP_qFooHgAkzXSJchge7Ue?usp=sharingChange...
x3mRouting Version 2.0.0 now available! June 30, 2020Version 2.0.0 Update Process - update instructionsVersion 2.0.0 Changes - see what's change...
Continuation ofhttps://www.snbforums.com/threads/custom-firmware-build-for-orbi-rbk50-v-2-5-0-42sf-hw.60308/. . .https://www.snbforums.com/threads/c.....

Don't Miss These

  • 1
  • 2
  • 3