Like every other website on the planet, SmallNetBuilder uses cookies. Our cookies track login status, but we only allow admins to log in anyway, so those don't apply to you. Any other cookies you pick up during your visit come from advertisers, which we don't control.
If you continue to use the site, you agree to tolerate our use of cookies. Thank you!

Router Charts

Click for Router Charts

Router Ranker

Click for Router Ranker

NAS Charts

Click for NAS Charts

NAS Ranker

Click for NAS Ranker

More Tools

Click for More Tools

Wireless Reviews

UniFi AP Long Range
At a glance
ProductUbiquiti UniFi AP Long Range (UAP-LR)   [Website]
SummaryAtheros-based N300 AP with biz-grade management system
Pros• Pseudo-PoE powered (injector included)
• Inexpensive
• Inconspicuous wall and ceiling mounting options
Cons• Longer range likely on downlink only.

Typical Price: $83  Buy From Amazon

Overview

Ubiquiti sent a few access points to help us review its UniFi 3.0 Enterprise Wi-Fi platform. We found the 5 GHz performance of its latest AC1750 class Ubiquiti UAP-AC Acess Point disappointing and are working through some problems found during the retest. In the meantime, we also tested the N300 class UAP-LR (Long Range), so let's see how it stacks up.

The UAP-LR is an business-grade 2.4 GHz N300 class access point managed via the free UniFi 3.0 software controller that runs on Windows, MacOS or Linux. Included in its package are a mounting bracket, ceiling backing plate, various screws and nuts, power cord, 24V passive PoE injector and Controller CD with user guide.

Ubiquiti Indoor Access Points

Ubiquiti Indoor Access Points

The table above shows the LR is one step below Ubiquiti's only dual-band N AP, the UAP-PRO. That step is pretty steep in price going from around $90 street for the LR to $220 for the PRO.

Note that the "Ubiquiti" 24V PoE injector that comes with the LR is not 802.3af/at compliant. This means that if you want to install more than a couple of Ubiquiti APs, things could get messy as the graphic below illustrates. But you can solve that with a Toughswitch PoE PRO that'll provide eight powered Gigabit ports for around $200.

Ubiquiti Passive PoE before and after

Ubiquiti Passive PoE before and after

The UAP-LR is meant to be installed on a wall or ceiling and includes brackets for mounting. As an enterprise-level access point, the exterior is all business. The human-facing side of the access point has an LED that shows the various states of the access point.

The back side has one 10/100 Ethernet port. The 10/100 port was surely used to keep product price point down and it is adequate for the N300 speeds the device is capable of. A reset button is also included that allows for returning to factory defaults.

Ubiquiti UAP-LR front and rear panel callouts

Ubiquiti UAP-LR front and rear panel callouts

Inside

The board design of the UAP-LR looks very clean and compact with no heatsink on the Atheros AR7241 CPU.

Ubiquiti UAP-LR inside

Ubiquiti UAP-LR inside

The table below shows that the N300 UAP-LR is a completely different beast than the AC1750 UAP-AC, which is included for comparison.

Ubiquiti UAP-LR Ubiquiti UAP-AC
CPU Atheros AR7241 Broadcom BCM4706
Switch In AR7241 Broadcom BCM53125
RAM 8 MB 256 MB Hynix H5PS1G63JFR (x2)
Flash 8 MB 16 MB Winbond 25Q128FVFG
2.4 GHz Radio Atheros AR9287 + Anadigics AWL6153 Pwr Amp (x2) - BCM4331KMLG
- SiGe 2605L (x3) 2.4 GHz Hi Power WLAN power amp
5 GHz radio N/A - Broadcom BCM4360
- Skyworks SE5003L 5 GHz, 23dBm Power Amp w/ Power Detector (x3)
Table 1: Access Point component summary and comparison

More Wireless

Wi-Fi System Tools
Check out our Wi-Fi System Charts, Ranker and Finder!

Support Us!

If you like what we do and want to thank us, just buy something on Amazon. We'll get a small commission on anything you buy. Thanks!

Over In The Forums

I have an N66u (Rmerlin 374.43_2) with the following vlan settings.robocfg vlan 20 ports "0t 8t"vconfig add eth0 20ifconfig vlan20 upbrctl addif br0 v...
dhcpstaticlist.sh is a helpful utility script to manage DHCP static leases. The script is only compatible with 384.13 release. The script displays a m...
In AP mode, does the WAN port automatically get assigned to LAN (VLAN 1)? I do see that in Tools -> Sysinfo, the WAN port gets assigned to VLAN 1, yes...
For those of you fighting the issue of 5ghz problems -- particularly pauses and disconnects -- here's another thing to look for: Do you have a Fire TV...
Just got into the VPN game today using IPVanish and Openvpn on my ac3100 running 384.13. Am able to successfully access my LAN when connected through ...

Don't Miss These

  • 1
  • 2
  • 3