Like every other website on the planet, SmallNetBuilder uses cookies. Our cookies track login status, but we only allow admins to log in anyway, so those don't apply to you. Any other cookies you pick up during your visit come from advertisers, which we don't control.
If you continue to use the site, you agree to tolerate our use of cookies. Thank you!

Wi-Fi Router Charts

Click for Wi-Fi Router Charts

Mesh System Charts

Click for Wi-Fi Mesh System Charts


The AD7200's admin GUI and feature set is basically the same as the Archer C2600 and C3200. Refer to this summary and use the online emulator to further explore features.

Basic mode status

Basic mode status

The screenshot below shows the Advanced > System Tools > System Parameters > Wireless Advanced screen for the 2.4 and 5 GHz radios. Note there is no USB 3.0 Interference Reduction checkbox in the 2.4 GHz settings. The Multi-User MIMO checkbox shouldn't be shown in the 2.4 GHz screen. TP-LINK confirms it's a bug and will have no effect on router performance.

Both radios have AP Isolation options, but neither has the Airtime Fairness controls found in the Broadcom-based Archer C3150. On the plus side, WDS-based wireless bridging is supported on both 2.4 and 5 GHz, where it isn't in the C3150.

Wireless Advanced settings

Wireless Advanced settings

For those curious about the 60 GHz radio settings, the two screens related to them are merged into one below. Channel choices are Auto (default), 1, 2 and 3.

60 GHz radio settings

60 GHz radio settings

Storage Performance

The summary graphic below from the Router Charts shows the AD7200 and AC2600 and AC3100 / 3150 class routers we've tested with our standard procedure with USB 3.0 connections and NTFS drive format. The AD7200 doesn't do well, coming in at the bottom of both comparisons.

Storage Performance Comparison - USB 3.0 / NTFS

Storage Performance Comparison - USB 3.0 / NTFS

Routing Performance

The Talon AD7200 was loaded with 1.0.9 Build 20160602 rel.37987 firmware and tested with our V4 router test process. You can download an Excel test summary that contains all functional and performance test results.

Table 2 summarizes the performance test results.

Test Description TP-LINK Talon AD7200
WAN - LAN TCP (Mbps) 929
LAN - WAN TCP (Mbps) 933
Total Simultaneous TCP (Mbps) 1737
TCP Connection Pass
WAN - LAN UDP (Mbps) 374
LAN - WAN UDP (Mbps) 325
Total Simultaneous UDP (Mbps) 747
UDP Connection Fail
Functional Score (%) 93.5
Table 2: Routing performance comparison

Total Simultaneous TCP/IP and UDP throughput are proving to be better performance differentiators than the unidirectional benchmarks. The highest performer so far for both benchmarks has been D-Link's DIR-879 AC1900 EXO router at 1850 Mbps and 1900 Mbps for TCP/IP and UDP, respectively. Results for other 4x4 routers are shown in the bar charts below for comparison.

Total Simultaneous throughput comparison

Total Simultaneous throughput comparison

Most products fail the new maximum UDP connection test and pass the TCP connection test and that's what the AD7200 did.

The Functional Score of 93.5% is quite good, second only to the 95.1% for Linksys' EA9500 and represents only 16 tests failing out of the 245 in the CDRouter test suite.

The largest group of failed tests were related to how the router's DNS proxy handles local DHCP server hostnames. Two fails are due to the router not supporting HTTPs admin connections.

On a positive note, the triggered port forwarding tests that fail for most other routers passed for the AD7200. The reason is the router supports mixing of single and port ranges in both the triggering and forwarded port settings.

Support Us!

If you like what we do and want to thank us, just buy something on Amazon. We'll get a small commission on anything you buy. Thanks!

Don't Miss These

  • 1
  • 2