Like every other website on the planet, SmallNetBuilder uses cookies. Our cookies track login status, but we only allow admins to log in anyway, so those don't apply to you. Any other cookies you pick up during your visit come from advertisers, which we don't control.
If you continue to use the site, you agree to tolerate our use of cookies. Thank you!

Router Charts

Click for Router Charts

Router Ranker

Click for Router Ranker

NAS Charts

Click for NAS Charts

NAS Ranker

Click for NAS Ranker

More Tools

Click for More Tools

Wireless Reviews

Backhaul

Backhaul throughput is key to the performance of Wi-Fi systems because it sets a cap on throughput available to be passed on to client devices at each node. Having a nice strong signal in a Wi-Fi system is not necessarily a reliable performance indicator. You could standing next to a mesh point that is getting only a trickle of throughput due to poor backhaul performance.

These tests run traffic between the root node LAN-side Ethernet port and mesh node Ethernet port. I'm showing only Hop 1 because that's all Covr has, due to its extender-based design. Although 270/300 Mbps ain't bad, it's not as good as what both big and mini Orbi and Linksys Velop have to play with.

Wi-Fi System Backhaul - Hop 1

Wi-Fi System Backhaul - Hop 1

Wi-Fi System

These benchmarks measure up and downlink 2.4 and 5 GHz throughput at each system node, by "walking" the octoScope Pal dual-band test client from node to node. Since tests are made with 0 dB attenuation between the Pal test client and each system node, all measurements are best case. As signal levels between system node and client drop (i.e. distance increases), throughput will decrease proportionate to the RvR curves above.

The 2.4 GHz downlink chart shows throughput measured at each node, with the A bars being the root node and B bars the Hop 1 node. C bars represent the Hop 2 node for TP-Link Deco, but Hop 1 with 21 dB of attenuation applied between client and node (AP) for mini Orbi and Covr.

Covr does much better than Deco on the Hop 1 and 2 tests, but not quite as well as Orbi mini.

Wi-Fi System Performance - 2.4 GHz downlink

Wi-Fi System Performance - 2.4 GHz downlink

2.4 GHz uplink shows Covr running neck-and-neck with Orbi mini,

Wi-Fi System Performance - 2.4 GHz uplink

Wi-Fi System Performance - 2.4 GHz uplink

5 GHz downlink shows Covr not doing as well as the others at the Root node. But once backhaul throughput comes into play for Case B and C, Covr actually does quite well.

Wi-Fi System Performance - 5 GHz downlink

Wi-Fi System Performance - 5 GHz downlink

5 GHz uplink shows Cover again besting Deco for Case B and C, but running further behind Orbi mini than on downlink.

Wi-Fi System Performance - 5 GHz uplink

Wi-Fi System Performance - 5 GHz uplink

More Wireless

Wi-Fi System Tools
Check out our Wi-Fi System Charts, Ranker and Finder!

Support Us!

If you like what we do and want to thank us, just buy something on Amazon. We'll get a small commission on anything you buy. Thanks!

Over In The Forums

helloiam Portuguese, so my English is a little bad.i haver Merlin firmware, Router Asus rt ac86u, can I put 2 vlans on same port? example I need vlan ...
Hi Folks,This seems like the best place to ask. I upgraded from an R7000 (original AC1900 version) Nighthawk to the XR500. I wanted the R7800 hardware...
How would I go about adding support for my HE IPV6 tunnel to my VPN server, does anyone have any suggested articles to read, or simply any suggestions...
I've got a Zyxel GS1100-24 unmanaged 24 port Gb switch. It has the option for 2 extra ports that can use 1G copper SFP modules. I could use the two po...
One of the reasons I just bought an AC68U was because I wanted the Traffic Analyzer.Apparently enabling this requires "that your information will be c...

Don't Miss These

  • 1
  • 2
  • 3