Like every other website on the planet, SmallNetBuilder uses cookies. Our cookies track login status, but we only allow admins to log in anyway, so those don't apply to you. Any other cookies you pick up during your visit come from advertisers, which we don't control.
If you continue to use the site, you agree to tolerate our use of cookies. Thank you!

Router Charts

Click for Router Charts

Router Ranker

Click for Router Ranker

NAS Charts

Click for NAS Charts

NAS Ranker

Click for NAS Ranker

More Tools

Click for More Tools

Wireless Reviews

TP-Link EAP225

AC1200 Wireless Dual Band Gigabit Ceiling Mount Access Point
At a glanceAll Wireless Performance
December 2017
ProductTP-LINK AC1200 Wireless Dual Band Gigabit Ceiling Mount Access Point (EAP225 v2)   [Website]
SummaryQualcomm-based AC1200 class 2x2 PoE-powered access point.
Pros• Inexpensive
• Great performance
• Excellent multi-client performance
Cons• No roaming assistance
• No client bandwidth controls

Typical Price: $90  Buy From Amazon

TP-Link's EAP225 was a surprising find. It's the lowest cost product in our roundup group and the best performer. It's the entry-level 802.11ac member of TP-Link's Auranet family, which includes four 802.11n and four 802.11ac APs. At just over 7" square, it's one of the larger APs, but not overly so. Its single gigabit Ethernet ports accepts 802.3af to power the AP, but it can also be powered by an included wall-wart.

The Qualcomm-based platform uses a QCA9563 3x3 802.11bgn wireless SoC as the processor and 2.4 GHz radio and QCA9882 for 5 GHz. However, if you examine the board shot below closely, you'll see unloaded components for a third 2.4 GHz RF chain.

TP-Link EAP225 board

TP-Link EAP225 board

The rest of the components are summarized in the table.

  TP-Link EAP225
CPU Qualcomm QCA9563 3x3 802.11bgn wireless SoC
Ethernet Atheros AR8033 Gigabit Ethernet PHY
RAM 128 MB
Flash 16 MB
2.4 GHz Radio - in QCA9563
- SiGE SE2565T 2.4 GHz power amp (x2)
5 GHz radio - QCA9882 11abgnac 2x2 radio SoC
- Skyworks SKY85717-21 5 GHz front end (x2)
Firmware tested 1.2.0 build 20170828

The EAP225 can be managed via its HTTPS web interface. Or you can install TP-Link's free EAP Controller on a Windows or Ubuntu, CentOS or Fedora Linux system. Auranet also has a cluster controller option using an AP-turned-controller to run up to 24 APs. But the only AP that can be used as a controller is the N300 class EAP115. Still, at only around $44, it might be an option worth exploring if you have a lot of APs to manage and don't want to run a software controller.

TP-Link EAP225 web GUI

TP-Link EAP225 web GUI

The EAP225 is the only product in the roundup to support automatic transmit power control and supports AP load balancing by limiting the number of associated devices. But on the downside, it band-steers 2.4 to 5 GHz only and has no roaming assistance features. Wireless backhaul is also not supported. So the only way to connect EAP225's is via Ethernet,.

TP-Link EAP225 WMM QoS

TP-Link EAP225 WMM QoS

The feature table says the EAP225 has no QoS features, but that's not 100% accurate. What is does provide is control of arcane WMM QoS parameters that will be of little use to many of us. If you're looking for simple ways to control client access priority or bandwidth use, the EAP 225 doesn't have them.

Features
Port TypeGigabit Ethernet
Ports1
PoE 802.3af
CPUQualcomm IPQ4018
SwitchQCA8072
RAM (MB)256
Flash (MB)?
Firmware1.01 09:46:24 03/28/2017
Captive Portal
Y
Cloud Mgmt
N
Web Mgmt
Y
S/W Controller Mgmt
Y
AP Controller
Y
VLAN
Y
Wireless Backhaul
Y
Client Bridge
Y
Mesh
N
NotesWireless backhaul uses WDS
Wireless
ClassAC1300
# of streams2
BandBoth
Band Steering
Y
AP Load Limiting
N
Roam AssistNone
Auto Tx Power
N
Auto Channel Mgmt
N
DFS
N
MU-MIMO
Y
Client Isolation
Y
Radio 12.4 GHz: in IPQ4018 + Skyworks SKY85303-11 2.4 GHz front end (x2)
Radio 25 GHz: in IPQ4018 + Skyworks SKY85717-21 5 GHz front end (x2)
FCC IDKA2AP2610A1
Antennainternal bent-metal dual-band dipole (x2)
Antenna Upgradeable
N
ConnectorN/A
RADIUS
Y
Schedule
Y
SSID #8
QoS
TypeBoth
DirectionBoth
Auto
N

More Wireless

Wi-Fi System Tools
Check out our Wi-Fi System Charts, Ranker and Finder!

Support Us!

If you like what we do and want to thank us, just buy something on Amazon. We'll get a small commission on anything you buy. Thanks!

Over In The Forums

Hello. So I am new to qos settings. I have 3 Ring cameras that I want to make sure it gets highest priority for bandwidth. How do I set that up in the...
I picked up a RT-N53 to put it into a client bridge. I am only able to put it into repeater mode (as well as AP or main router).Does anyone know how t...
I have an ASUS RT-AC3200 router and when I am trying to use my xbox I am always on a strict NAT type and it is because it says I have a double NAT. I ...
i purchased a new asus rt-ac86u. connected to existing adsl modem (Linksys WAG320N) and i cam getting constant WAN connection fails, about every 5 to ...
Quick question - I have enabled FTP with TLS and it works just fine, however, how can I use my own certificate instead of the one generated by the rou...

Don't Miss These

  • 1
  • 2
  • 3