|At a Glance|
|Product||Iomega eGo Portable Hard Drive, SuperSpeed USB 3.0 Reviewed (35327)|
|Summary||Small but capacious portable USB 3.0 drive|
|Pros||• Around 3X faster than USB 2.0|
|Cons||• 700 MB is permanently devoted to CD-ROM partition
• Indicator inconveniently located
USB 3.0 drives are starting to move into the mainstream as the faster host adapters make their way into notebooks, netbooks and desktops. So Iomega's August announcement that it was switching all its USB drives to USB 3.0 interfaces and keeping prices the same is really just the leading edge of what's sure to be a trend.
Iomega asked if we'd like to take one of their newly-minted "SuperSpeed USB 3.0" eGo Portable drives for a, um, spin. So here's a quick look.
The eGo has been around for a bit and includes five USB 2.0 lines (Figure 1) in addition to the SuperSpeed USB 3.0. It will be interesting to see if all the flavors make the transition to USB 3.0.
Figure 1: Iomega eGo product lines
There are three new SuperSpeed USB 3.0 eGos: Ruby Red, Midnight Blue and the BlackBelt version sent for review. All three colors come in 500 GB and 1 TB (tested) capacities and have three year warranties, if you register the product.
Iomega's site also shows a "Charcoal" version that doesn't have the color-coordinated "Power Grip Band" and 256-bit hardware encryption that comes with the Red, Blue and Black versions. The Charcoal version comes only in 500 GB. Iomega told me that this version was their first 2.5" USB 3.0 drive, released back in June. They are not discontinuing it at this point. But at the same price as the newer models and fewer features, they might as well.
Figure 2 shows the business end of the drive, where both the USB 3.0 connector and drive power / activity light sit. The light's placement is a poor choice and makes it pretty useless.
Figure 2: Iomega eGo USB 3.0 back
The Black, Blue and Red models have Iomega's Drop Guard Xtreme that is supposed to protect the drive from seven foot drops. The Charcoal version has only plain ol' Drop Guard that offers only 51" (make sure you measure before you drop) drop protection.
I don't care much for the undeleteable CD-ROM partions I've found on some flash drives. So I didn't care much either for the one on the eGo that held only a copy of the Iomega Encryption Utility installer. Since you have to go online to download the Trend Micro Internet Security, Roxio Retrospect Express Backup software, Iomega QuikProtect, and MozyHome Online Backup installers anyway, why not free up the space and put the Encryption Utility there, too?
Iomega includes a USB 3.0 cable with the drive that mates to the special USB 3.0 connector on the drive and has a plug that will connect to either USB 3.0 or USB 2.0 hosts. Of course, you only get USB 3.0 speed with a USB 3.0 host adapter.
For performance testing, I used the new version 3 NAS testbed, which has a NEC-based USB 3.0 host adapter built into its ASUS P7H57D-V EVO motherboard. I upgraded the driver to the nusb3drv 220.127.116.11 version downloaded from ASUS' support site.
As I have with other attached drives, I ran HD Tune's read and write benchmarks to get a profile of performance across the drive platter. I was also going to run the File Benchmark tests, but found they wouldn't run due to the dedicated CD-ROM partition. I also had to upgrade to HD Tune Pro 4.6, since the 3.5 version I had wouldn't even recognize the entire 1 TB drive space.
Figure 3 shows the results of the HD Tune Write Benchmark, indicating an average read speed of 70.6 MB/s, with a peak speed of 94.7 MB/s. Speed appears to decay pretty linearly across the drive platter.
Figure 3: Iomega eGo USB 3.0 HD Tune Pro Benchmark - write
For reference, I ran the same test on a WD MyBook USB 3.0 drive, which uses a 3.5" SATA drive. Figure 4 shows it had a higher 103 MB/s peak write speed. Even though speed doesn't look like it has much of a downward slope, the higher variation yielded an average write speed of only 82.5 MB/s.
Figure 4: WD MyBook 3.0 HD Tune Pro Benchmark - write
HD Tune Benchmark read results for the Iomega and WD drives are shown in Figure 5 and 6, respectively.
Figure 5: Iomega eGo USB 3.0 HD Tune Pro Benchmark - read
The WD clearly beats the Iomega on read, both on peak and average speed with 135.4 MB/s , 109 MB/s for the WD vs. 99.2 MB/s, 73.6 MB/s for the Iomega. Still, the 70+ MB/s write and read speeds for the eGo are almost 3X what you can get from the fastest USB 2.0 drive, given that bus' slower speed.