Like every other website on the planet, SmallNetBuilder uses cookies. Our cookies track login status, but we only allow admins to log in anyway, so those don't apply to you. Any other cookies you pick up during your visit come from advertisers, which we don't control.
If you continue to use the site, you agree to tolerate our use of cookies. Thank you!

Wi-Fi Router Charts

Click for Wi-Fi Router Charts

Mesh System Charts

Click for Wi-Fi Mesh System Charts

Setup and Administration - more

As I mentioned earlier, the "AP" in the AP 200 is actually a wireless router, as is evidenced by the Port Forwarding settings shown in Figure 8. There is also a DMZ option, which I used to run the IxChariot-based throughput tests.

Port forwarding
Click to enlarge image

Figure 8: Port forwarding

Figure 9 shows the settings for the 4-level priority-based QoS feature. There are no service pick-lists available, so you'll need to know the ports used by the applications you want to control. Note that you can apply the QoS rules to individual or all users and for both up and downlink traffic.

Click to enlarge image

Figure 9: QoS

There's not much to say about the Firmware Update feature, other than it has a button to check online for updated firmware. Figure 10 shows the Debug screen, which provides a wealth of handy information. It's just too bad that the "Scanned AP's" list that shows in-range WLANs isn't real time and that you'll get a "Connection will be lost, are you sure?" pop-up before it drops the WWAN connection to rescan.

Click to enlarge image

Figure 10: Debug

I should note that the AP 200's receive sensitivity seems to be pretty good. It picked up my neighbor's WEP-encrypted AP, which is never picked up by any of the wireless clients that I test!

Support Us!

If you like what we do and want to thank us, just buy something on Amazon. We'll get a small commission on anything you buy. Thanks!

Don't Miss These

  • 1
  • 2