Like every other website on the planet, SmallNetBuilder uses cookies. Our cookies track login status, but we only allow admins to log in anyway, so those don't apply to you. Any other cookies you pick up during your visit come from advertisers, which we don't control.
If you continue to use the site, you agree to tolerate our use of cookies. Thank you!

Wi-Fi Router Charts

Click for Wi-Fi Router Charts

Mesh System Charts

Click for Wi-Fi Mesh System Charts

N600 Wireless Dual Band Gigabit Router Premium Edition
At a glance
ProductNETGEAR N600 Wireless Dual Band Gigabit Router Premium Edition (WNDR3800)   [Website]
SummaryHigh performance dual-band, dual-radio 802.11n router with bandwidth metering external USB drive and printer sharing w/ UPnP AV / DLNA media server, 'cloud' file access and completely new admin GUI.
Pros• Revamped user interface
• Many new features including printer sharing and remote file access
Cons• Lower routing speed than WNDR3700v2

Typical Price: $270  Buy From Amazon


Updated 10/1/2011: Corrected WEP info

Fans of the latest in consumer router technology are abuzz about NETGEAR's latest additions, the WNDR3800 and WNDR4500. NETGEAR sent the WNDR3800 first, so that's what I'm looking at this time. Stay tuned for the WNDR4500 soon.

The WNDR3800 looks just like its predecessor, the WNDR3700v2, except for a sporty red front panel band as shown in Figure 1. In fact, the 3800's hardware platform is almost identical to the 3700v2's, which I'll get to in a bit. The key difference is that NETGEAR has packed the 3800 with as many features as would fit and gave it an entirely revamped admin interface.

NETGEAR WNDR3800 front panel
Figure 1: NETGEAR WNDR3800 front panel

The rear panel diagram in Figure 2 shows the same Gigabit port complement as the WNDR3700v2 that includes one USB 2.0 port. The 3800's USB port is more talented than the 3700v2's, adding USB printer sharing. Drive sharing features have been enhanced with a UPnP / DLNA server and remote-access "cloud" sharing.

NETGEAR WNDR3800 back panel
Figure 2: NETGEAR WNDR3800 back panel


As noted above, the 3800's hardware is virtually the same as the 3700v2's. In fact, they share the same FCC ID (PY308300092), so the RF design must be the same. The only difference is that the 3800's RAM has been doubled from the 3700v2's, to 128 MB. Flash stays the same as the v2 at 16 MB, which was doubled from the 3700v1.

I've summarized the key components in Table 1. Note that neither radio has external power amplifiers. Check out internal board shots in the WNDR3700v2 review.

  WNDR3800 WNDR3700v2
CPU Atheros AR7161 Wireless Network Processor Atheros AR7161 Wireless Network Processor
Switch Realtek RTL8366SR Realtek RTL8366SR
RAM 128MB 64 MB
Flash 16 MB 16 MB
2.4 GHz Radio AR9223 2.4GHz single chip 2x2 AR9223 2.4GHz single chip 2x2
5 GHz radio AR9220 2.4GHz/5GHz single chip 2x2 AR9220 2.4GHz/5GHz single chip 2x2)
Table 1: WNDR3800 and WNDR3700v2 components


Craig Ellison will have a complete feature review of the WNDR3800 in a week or so [done], since there are a few new things such as ReadySHARE Printer sharing, ReadySHARE Cloud and OpenDNS based parental controls. There is also a new Clear Channel selector that continuously monitors for neighboring network interference and automatically changes channel to avoid it.

NETGEAR is trying an interesting strategy in its wireless product line by having two top-of-line products. The company's marketing message for the WNDR3800 and 4500 is that you should choose the 3800 if you want the most features and the 4500 if you want the highest performance.

This puts buyers in an interesting position since spending the most money (for the 4500) doesn't get you the most goodies as shown in Figure 3.

Premium features compared
Figure 3: Premium features compared

I'll give you a taste of the new NETGEAR Genie user interface that Craig will review in detail.

NETGEAR Genie Basic view
Figure 4: NETGEAR Genie Basic view

NETGEAR has finally brought its admin GUI into the new millenium with a completely revamped interface that offers both Basic (Figure 4) and Advanced (Figure 5) views. I didn't drill through every screen. But my initial reaction is that I like the new interface. Now if the ReadyNAS guys could just take a hint and fix their GUI...

NETGEAR Genie Advanced view
Figure 5: NETGEAR Genie Advanced view
Updated 10/1/2011

Two things that you should be aware of right now. is that WEP support has been completely removed from the 3800. First, WEP is available only if you select 802.11b/g compatible Up to 54 Mbps mode. According to NETGEAR, this is now a requirement (removal of WEP support from high-throughput modes) for Wi-Fi Certification.

Second, IPv6 support has been added for WAN connections with Auto Detect, Auto Config, 6to4 Tunnel, Pass through, Fixed IP, DHCP and PPPoE types. There is no IPv6 support on the router LAN side in its DHCP server, however.

Support Us!

If you like what we do and want to thank us, just buy something on Amazon. We'll get a small commission on anything you buy. Thanks!

Don't Miss These

  • 1
  • 2