Like every other website on the planet, SmallNetBuilder uses cookies. Our cookies track login status, but we only allow admins to log in anyway, so those don't apply to you. Any other cookies you pick up during your visit come from advertisers, which we don't control.
If you continue to use the site, you agree to tolerate our use of cookies. Thank you!

Wi-Fi Router Charts

Click for Wi-Fi Router Charts

Mesh System Charts

Click for Wi-Fi Mesh System Charts


At a Glance
Product MetaGeek inSSIDer for Office [Website]
Summary Wireless network troubleshooting tool with 2.4 GHz RF detection
Pros • Provides lots of Wi-Fi data including signal strength (RSSI)
• Detects both Wi-Fi and non-Wi-Fi RF activity
Cons • Windows Vista, 7, 8 only
• RF information is for 2.4 GHz band only
• Some analysis suggestions aren't helpful


6/11/2013: Clarified product ownership

MetaGeek, formed in 2005, is a small company focusing on providing products to manage wireless networks. MetaGeek makes software and hardware tools for wireless network discovery and optimization (inSSIDer), wireless spectrum analysis (Wi-Spy and Chanalyzer), wireless packet analysis (Eye P.A.). MetaGeek also partners with VisiWave, TamoGraph, and Ekehau, supporting Wi-Spy integration with these third-party site survey products. We reviewed MetaGeek's Wi-Spy 2.4x quite some time ago.

inSSIDer is a free and very popular Wi-Fi network discovery and analysis tool that uses the wireless adapter in the device it runs on to capture and display wireless network data.

inSSIDer for Home is a newer product with more features that runs on Windows Vista, 7 and 8 systems. inSSIDer 2 runs on Windows XP and there are also free inSSIDers for Android and MacOS. inSSIDer for Office is a new product that will be the focus of this review.

The key differences between the free inSSIDer versions and the $199 inSSIDer for Office is that Office comes with the Wi-Spy Mini, which is an RF (radio frequency) receiver that enables additional features in the 2.4 GHz band only. inSSIDer for Office supports only Windows Vista, 7 and 8.

Wi-Spy Mini

Wi-Spy Mini

As noted earlier, inSSIDer uses the Wi-Fi card in your device to analyze wireless signals. Thus, it is reporting the quality of your wireless network as seen by the wireless components in your laptop. inSSIDer measures and reports detected SSIDs, signal strength (measured in dBm), channel, security method (Open, WEP, WPA, WPA2), the MAC of the Wi-Fi radio, and the 802.11 network type (a/b/g/n).

Here's a quick rundown of inSSIDer Office's features:

  • Analyzes up to 8 SSIDs simultaneously
  • Identifies poor channel placement
  • Measures signal strength (RSSI)
  • Measures RF noise
  • Calculates a Link Score reflecting overall Wi-Fi quality
  • Provides tips on how to improve Wi-Fi quality
  • Measures usage by channel
  • Supports Windows Vista, 7, and 8 (32 bit and 64 bit)
  • Detects and measures network Wi-Fi data in both 2.4 and 5.0 GHz bands (depending on device adapter)
  • Detects and measure 802.11a/b/g/n networks
  • Detects and identifies Open, WEP, WPA, WPA2 Wi-Fi security

In Use

I installed inSSIDer for Home on a Windows 7 PC and inSSIDer for Office on a Windows 8 PC without issue. The software was responsive and simple to use. inSSIDer for Home has just two tabs called Learn and Network. inSSIDer for Office has the Learn and Network tabs, plus tabs called Channels and Analyze, shown below.



I like that MetaGeek includes a tab in both versions of the software called Learn. In the Learn tab, you can find additional tabs titled User Guide, Additonal Tools, Lessons, and Webinars. Additional Tools launches additional web pages where MetaGeek promotes some of their other tools such as Wi-Spy for Wi-Fi Interference detection and Eye P.A for analyzing wireless network traffic.

The Lessons and Webinars tabs link you to various sources of information on a wide variety of Wi-Fi topics. The only downside to these tabs is once you click on one of the links to these tools, you can't get back to the other functions in the Learn tab without restarting the application.

For my tests of inSSIDer for Office, I set up several APs in various areas of a two-story building. I set up two different 802.11n networks, an 802.11g network, and an 802.11a network. All four SSIDs were connected to the same wired network. I then walked around and took various readings, as well as looked at the various bits of analysis provided by inSSIDer.

Signal Strength

Signal strength is an important measurement of Wi-Fi quality. We're all familiar with wireless signal strength on cell phones and laptops displayed graphically by the number of bars, where a signal with five bars is typically better than a signal with three bars. Using a tool like inSSIDer allows for a more granular view of signal strength. The goal is simple - the higher the signal strength, the better.

The Truth about RSSI

The Receive Signal Strength Indicator (RSSI) is defined as part of the 802.11 standard to provide a wireless client (STA) with a way to measure the strength of its received signal. The STA needs to know the received signal strength to make many operational decisions, the most basic of which is when a channel is clear for transmit.

RSSI is an integer with an allowable range of 0 - 255. The standard states "RSSI is intended to be used in a relative manner. Absolute accuracy of the RSSI reading is not specified." Conversion of this integer value to dBm or mW is entirely at the discretion of the wireless driver creator.

Simply put, this means that the RSSI value that inSSIDer or any other Wi-Fi tool reports will differ from device to device. So if you are wondering why that guy in the Forum insists that his laptop reports a -30 dBm RSSI when standing next to his router and you get only -45 dBm standing next to your same make/model router, that's why!

The unit of measurement for signal strength is dBm. dBm is a unit of measurement of power in decibels (dB) in relation to 1 milliwatt (mW) of power, calculated with a logarithmic formula. A reading of 0 dBm means power of 1 mW. A reading of -30 dBm means power of .001 mW and a reading of -90 dBm means power of .0000000001 mW.

The inSSIDer software makes it easy to see where signal strength is strongest and weakest. Below, I am 6 feet away from my MDC9 SSID. As you can see, my signal strength is -42 dBm. Windows 8 shows this signal to be "five bars."

6 Feet Away

6 Feet Away

I moved about and looked at the inSSIDer signal strength at various locations. Approximately 35 feet away on the same floor and separated by two walls, my signal strength was -50 dBm. Windows 8 still showed this signal to be "five bars." Approximately 40 feet away and one floor below my AP, but outside the building, my signal strength was -70 dBm. Windows showed this signal to be "four bars" while inSSIDer called this a Weak Connection and "lower-than-optimal." inSSIDer recommended that I consider adding an AP for better Wi-Fi coverage at this location. Interestingly, just inside the same wall, my signal strength went back to -50 dBm.

Channel Selection

2.4 GHz networks broadcast on 11 different frequency ranges using channels numbered from 1-11. 5.0 GHz networks broadcast on 24 different frequency ranges using channels numbered from 36-165. Wireless performance can improve by using a channel that is not used by another nearby radio.

inSSIDer provides a clear picture of the number of SSIDs occupying each channel within range of the device it is running on. Keep in mind that inSSIDer does not decode or keep track of the actual data transmitted on the networks it detects. So it can't directly determine how "busy" each network is. All it knows is that the networks are there and active (beaconing). The Mini's ability to detect RF activity, however, is used to indirectly determine channel activity as we'll see later.

inSSIDer may recommend changing to another channel to improve performance if it detects multiple SSIDs using the same channel. The screenshot below identifies all the SSIDs on channel 3, along with each's signal strength, wireless network type, and security type.



I found inSSIDer a bit circular at times with its channel analysis. With my AP on channel 6, inSSIDer displayed the message "Improve the Link Score by Switching to Channel 11." Once I changed to channel 11, the analysis tool stated that my SSID was sharing "channel 11 with one or more networks... low throughput is likely to occur" and recommended I change to channel 1. Once on channel 1, inSSIDer displayed the message "Improve the Link Score by Switching to Channel 6."

Nevertheless, I found inSSIDer useful for identifying the number of SSIDs on each channel of both the 2.4 GHz and 5.0 GHz bands. inSSIDer's Channels tab provides more detailed information about the SSIDs detected on each channel on each spectrum.

Support Us!

If you like what we do and want to thank us, just buy something on Amazon. We'll get a small commission on anything you buy. Thanks!

Don't Miss These

  • 1
  • 2