Like every other website on the planet, SmallNetBuilder uses cookies. Our cookies track login status, but we only allow admins to log in anyway, so those don't apply to you. Any other cookies you pick up during your visit come from advertisers, which we don't control.
If you continue to use the site, you agree to tolerate our use of cookies. Thank you!

Wi-Fi Router Charts

Click for Wi-Fi Router Charts

Mesh System Charts

Click for Wi-Fi Mesh System Charts

AC1750 Dual Band Wireless AC Gigabit Router
At a glanceWiFi5 Router Performance
June 2015
ProductTP-LINK AC1750 Dual Band Wireless AC Gigabit Router (Archer C8)   [Website]
SummarySecond generation Broadcom-based AC1750 class router with Gigabit Ethernet ports and USB 2.0 & 3.0 storage and printer sharing
Pros• Up and down bandwidth control
• Improved storage performance vs. C7
Cons• No VPN server

Typical Price: $146  Buy From Amazon


Update 10/17/14 - Miscellaneous corrections from TP-LINK

TP-LINK does not operate on the bleeding edge. While others rush buggy AC2350 and AC3200 products to market, the company has yet to release its first AC1900 class router. Its latest router is the Archer C8 I'm reviewing today. The C8 is TP-LINK's second run at producing an AC1750 router (or third if you count the Archer C7 V2).

TP-LINK has classed-up the C8's packaging for higher WAF, opting for an all-white motif, save for the matte silver bracket that stands the router upright with a slight backward tilt. You can't remove this bracket—not easily at least—so wall or ceiling mounting is out.

The front panel callout diagram below explains all the backlit blue indicators that lie below a glossy clear front cover. A row of cooling exhaust slots are discreetly located at the top of the router, which has a gap between it and the bracket.

Archer C8 front panel callouts

Archer C8 front panel callouts

The rear panel has only Gigabit Ethernet (with no Link / Activity lights) and USB 2.0 ports, Reset / WPS button and power switch. The USB 3.0 port is on the right side panel aside a wireless on / off switch. Most of the back cover is perforated for cooling.

Archer C8 rear panel callouts

Archer C8 rear panel callouts


Update 10/17/14 - Component corrections

The C8 has a completely different design than the Archer C7. It's a fairly standard second generation Broadcom design based around a BCM4709 BCM4708 CPU. The board shot taken from the FCC ID docs shows three RP-SMA connectors for three external dual-band dipole antennas—no 2.4 GHz antennas squirreled away inside this time.

TP-LINK Archer C8 board with heatsink

TP-LINK Archer C8 board with heatsink

A single large heatsink spans across two RF "cans" and is coupled via thermal pads to the can lids that are in turn coupled to the CPU and two wireless devices via more thermal pads. There are detail shots of this in the gallery later on. The board closeup with heatsink and can tops removed is too fuzzy for component ID, but clear enough so that you can see the key component layout.

TP-LINK Archer C8 board with w/o heatsink

TP-LINK Archer C8 board with w/o heatsink

The overall design reminds me a lot of the ASUS RT-AC68U, albeit a bit more compact.

ASUS RT-AC68U board top

ASUS RT-AC68U board top

The C8 key components are summarized in Table 1 along with the C7 V2's. I am waiting to hear back from TP-LINK on the RAM and flash so they are guesses for now.

  TP-Link Archer C8 TP-Link Archer C7 V2
CPU Broadcom BCM4708 QCA9558 dual-band, 3-stream 802.11n SoC
Switch In BCM4708 Atheros AR8327
RAM 128 MB 128 MB Winbond W9751G6JB DDR2 (x2)
Flash 8 16 MB 8 MB Winbond W25Q64FV
2.4 GHz Radio Broadcom BCM4331
- Unidentified 2.4 GHz power amp (x3)
In QCA9558
- Unidentified 2.4 GHz power amp (x3)
5 GHz radio - Broadcom BCM4360
- SiGE 5005L 5003L1 5 GHz power amp (x3)
- QCA9880-BR4A 3x3 802.11ac radio
- SiGE 5005L 5 GHz power amp (x3)
Table 1: Component summary

Support Us!

If you like what we do and want to thank us, just buy something on Amazon. We'll get a small commission on anything you buy. Thanks!

Don't Miss These

  • 1
  • 2